| Home>Bearing knowledge>Common adjustment methods for radial bearing clearance |
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";
Detailed adjustment methods for radial bearing clearance
Source: Bearing network time: 2013-08-15
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1. For multi-oil wedge fixed bearing bushes; in principle, it is not allowed to repair and adjust the bearing bush gap; if the gap is not suitable, the new tile should be replaced.
2. For multi-oil wedge tilting bearing bush; do not allow to repair the tile; if the gap is not correct, the tile should be replaced. The tile with adjustable thickness can be added with stainless steel pad under the adjusting block on the back of the tile; Thin adjustment block thickness method to adjust the amount of wattage. Pay attention to the multi-oil wedge tilting bearing bush; the thickness error between the same group of tiles should be less than 0. 01mm.
3. For the top clearance of cylindrical and elliptical bearing bushes; it can be adjusted by means of hand-grinding or scratching or adjusting the condition of the bearing bisector.
4. For the backlash of the cylindrical and elliptical bearing bushes; it can be adjusted by means of hand-grinding or scraping of the bearing and splitting the surface after turning and turning.
Recommend to friends comments close window
| Bearing related knowledge |
What is the type of bearing?
Bearings in the process of using imported bearings, the need to pay attention to the equipment and the skills of replacing the bearing, talk about the oscillation of the bearing and the temperature of the bearing.
SKF single row deep groove ball bearings commonly used suffix:
|
This article links to http://
Please indicate China Bearing Network http://
Previous:The key to NSK bearing cooperation: The shortage of steel ball lapping and super-finishing in NSK bearing
Pipe Wrap Tape System describe
The XUNDA-T400 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
It is a three-ply cold applied tape with stabiliesed polyethylene backing and butyl rubber adhesive layers on both sides.It is also used as inner-layer tape. It shall be applied by hand or with a wrapping machine
The 3Ply tape shall be applied after the Liquid adhesive and before the outer-layer tape by hand or with a wrapping machine
2 Structure
The specification of the tape consists of four layers,
Internal Adhesive layer:Butyl rubber
External Adhesive layer: Butyl rubber
Film backing:Special blend of stabilized polyethylene fines
Interleaf:Anti adhesive Film Treated with Silicone
3 Features:
Excellent bonding between adhesive and carrier film via co-extruded intermediate layer.
Mechanically highly resistant tape system.
Practically impermeable to water vapour and oxygen.
Resistant to soil bacterial and soil electrolyte.
Compatible with coating from PE,PP,FBE,PU,CTE and Bitumen and ext- .
A Total Coating System with:
High adhesion and shear resistance
Resistance to corrosion disbondment
High electrical resistance
High dielectric strength
High corrosion protection for steel substrates
4 Physical Properties
Thickness: 0.80 mm ( 30 mils)
width: 100 mm to 800 mm
Length: 10 m , 25 m , 30 m and so on
Double Side Tape
Heavy Duty Double Sided Tape, Strong Double Sided Tape, Removable Double Sided Tape, Wide Double Sided Tape
Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com