Home improvement hardware installation three steps
Injection Molded Ferrite Magnet Ferrite Ring Magnet,Electrical Injection Molded Ferrite Magnets,Injection Molded Bonded Ferrite Magnet,Injection Molded Ferrite Magnet Honesun Industrial Co.,Limited , http://www.chinamagnetise.com
2. Installation of electrician lamps and switch socket panel should be done after the wall brush coating or wallpapering is completed, and then the installation of the lamps and the installation of the switch socket panel. There have been instances when a company was working to save personnel costs. In the process, the electrician was allowed to install switch sockets prematurely, and when the wall of the switch socket panel was cut with a wallpaper knife, the panel was accidentally scratched.
3. Installation of sanitary ware and bathroom hardware As the overall management level of the current home improvement industry is still very low, the quality of workers on the construction site is generally poor. Therefore, on some construction sites, there have been a number of phenomena where the installed bathtub was used first by construction personnel. In recent years, there have been many cases of complaints in this area. Therefore, it is recommended that consumers do not have to install sanitary ware before starting the inspection and the majority of construction workers have not evacuated the site unless they are forced to do so. Otherwise, it is very likely that the hair left after bathing will be found in a brand new bathtub.