How to do six password locks forgot your password?

HC Security Network News locks is a simple and practical anti-theft locks, but if you forget your password trouble, here we come together to solve how to open locks forgotten password problem.

1

One of the solutions:

1. Push the password as far as possible in the opposite direction to which the switch can be pulled, open the gap of the flashlight, turn the password disk, and observe the groove of the shaft underneath.

2. After the groove is found, the number of the groove is recorded, and the three password disks record the numbers one by one. 3, get three numbers, the number is processed bit by bit: less than 5 plus 5, greater than 5 minus 5, that is, get the password.

The second solution:

With the right force, use the right hand to turn the password lock switch in the open direction, slowly rotate from the leftmost password, feel the right hand move a little, then come to the second place, and then continue.

Solution three:

Some netizens give such a way to cow X: start from 0001, it should not be able to open 9999, 1 second a password, 1000 seconds can be round, 20 minutes enough! 2 seconds a password, 2000 seconds can be round Once again, 35 minutes is enough!

All of the above three methods are theoretical, and may take a long time to open, so here are a few quick and practical solutions.

Solution four:

How to remember the address of the store, you can ask the store, they generally know what the password is.

Solution five:

One of the most practical methods is to find the unlocking company to open, which is safe and convenient. You can also call 110, 119 to help our lovely and respectable police uncle.

Solution six:

Although this method is not very reliable, but it can be used when the situation is urgent, it is opened with a hammer, although this method is more extreme, but is it a method?

Well, the above are all the solutions for how to unlock the password lock forgot how to open the password, is it very rewarding!

Editor in charge: Yao Yuze

Annealed Steel Bar is produced by annealing which is one kind of heat treatment to get proper hardness for machining. Our advantages and more services of annealed steel bar includes:

1) Wide range of diameters from 10mm to 300mm

2) Customized Length from 100mm to 12000mm

3) Good surface roughness: 0.4um to 1.5um

4) Good straightness: 0.5mm/m to 2mm/m

5) Good roundness: 80% of diameter tolerance

6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11

7) Matched further processing: Grinding, polishing, straightening

8) Anti-rusty package

9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing

10) Fast delivery time

Annealed Steel Bar

Annealed Bar,Scm420 Equivalent,4140 Annealed Hardness,Annealed Steel Properties

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.lerenspecialsteel.com