Sand blasting machine uses some knowledge of abrasive consumables
If you want to make the sandblasted aluminum parts whiter with some high-alloy steel, you should consider the use of high-cost stainless steel pellets and wire cutting pills. As the name suggests, flame cutting machines are cut by oxyacetylene or oxyfuel. Flame Cutting Machine Flame Cutting Machine,Cnc Machine,Cnc Plasma Table,Air Plasma Cutting Machine Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnformingmachine.com
Some knowledge of abrasive consumables for sandblasting equipment:
1. Sandblasting processing: range of sandblasting processing: hardware rust removal, aluminum alloy blasting, glass blasting (matte effect), plastic blasting (deburring), acrylic blasting (matte effect), PC, PS surface Treatment, resin surface treatment, casting workpiece blasting, zinc alloy blasting (rough surface), stainless steel "target=_blank> stainless steel blasting, stone material blasting, hardware removal paint, hardware removal welding, shot blasting, etc. Accessory surface treatment
2, acrylic sandblasting: If the customer request is very foggy, generally spray glass sand, if the requirements are higher, you can use white corundum. If the requirements are not very foggy and have certain transparency, you must use glass beads. Sometimes you add a little glass sand to the glass beads, so the effect of the spray is a little bit transparent.
3, stainless steel "target=_blank> stainless steel blasting: generally need to understand stainless steel "target=_blank> stainless steel is what kind of panel, there are polished surface alloy steel shot, brushed surface, as well as the original board of matte surface, need roughness, For the surface smoothness, brown fused alumina and white corundum can be used. There are special requirements and need to be smooth. Glass beads and glass sand are used.
4, die-casting parts: generally are used to remove burr low-alloy steel, generally can use shot blasting machine low-alloy steel, using cast steel shot steel ball, using steel ball steel shot blasting blasting object surface scratch less, scratch shallow and Small, for the selection of steel sand to remove the surface dirt, generally consider the combination of steel ball and steel sand. If you want to make the sandblasted aluminum parts whiter with some high-alloy steel, you should consider the use of high-cost stainless steel "target=_blank> stainless steel shots, steel cut shots, if you want to save costs, consider casting steel beads and non-stop steel shots according to 8 The ratio of 2 is mixed and used. When the sandblasting shot is shot, the steel ball is cleaned once every time, and the multiple sandblasting shots can achieve a relatively white effect.
5, iron parts: iron parts blasting are generally deoxidized layer and rust removal, to the side thorn, some sprayed sand will be plated low alloy steel, some will be sprayed after sanding, usually sprayed brown fused alumina and white Corundum (selected according to color requirements and economic costs).
In fact, for the steel structure, steel, steel plate rust blasting work, you can use the cheap sandblasting grade white corundum, garnet sand and other natural sand for sandblasting, the same can achieve the required SA2.5 level.
Transfer from: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
1. CNC Flame Cutting Machine is the earliest and best CNC cutting equipment. Flame Cutting Machine is mainly used in heavy industries with low precision requirements, such as sheet metal, steel structure, shipbuilding, machinery and construction.
2. The flame cutting machine is suitable for the cutting of carbon steel plates of 5mm or more.
3. Economical and practical.