[recommended] autumn is a good time to lay the floor!!!!!

Recently, some homeowners said that the floor they laid in the summer had cracked a clear gap, and it was not known what caused this. In this regard, the relevant flooring industry explained that: summer room temperature is high, when the pavement floor into the fall and winter season, the physical factors affected by thermal expansion and contraction, easily deformed, and even more obvious cracks. In winter, paving the floor, in the summer there will be the phenomenon of swelling from the drum. Therefore, under normal circumstances, it is best to choose the pavement in the spring and autumn seasons.


If you must choose to work in summer, you must avoid the sun exposure of the floor, to ensure that the room temperature is less than 30 °C; the construction temperature in winter should not be lower than 16 °C. As a city in the south, Chengdu has better flooring conditions than the northern cities. It mainly adopts methods such as ventilation and dehumidification.

The concrete method of paving is: Adjust the floor direction, from the door to the room, the maximum span of the floor is 6 meters by 8 meters. If you exceed this limit, you must leave a contraction joint and use the buckle; the wall root, the door bead interface Reserve expansion joints to be greater than 8 mm; splicing requirements of continuous, uniform, residual glue to be cleaned in time; baseboard must reach 12 mm thick, otherwise it is difficult to cover up the contraction joint; aluminum alloy layer thickness should be guaranteed in more than 2 mm, Too thin and easy to warp and deform. In addition, after the check-in, the floor is best maintained once a month, not only to extend the floor life, but also to prevent the moisture in the air from infiltrating the substrate, resulting in deformation of the floor.

Flooring aluminum alloy door

Hacksaw

Power Hacksaw,Junior Hacksaw,Electric Hacksaw,Mini Hacksaw

ZHOUSHAN CHUNLEI HACKSAW CO.,LTD , https://www.bailei.com