ThinkDesign application in automotive mold design (5)
3) Automatically acquire deformation data by comparing Mesh of point cloud and surface Figure 4-4 automatically obtaining deformation data 4) Apply the GSM command to complete the rebound modification of the product. Figure 4-5 Results of the rebound modification of the GSM command completion product 4.2 Using FEA-MESH to modify the rebound Combining Compensator technology with FEA data can improve mold design efficiency, and designers no longer have to spend a lot of time rebuilding springback-compensated surfaces. The process is as follows: 1) Obtain the initial mesh and springback mesh according to FEA. 2) In the TD, the node information is obtained from the initial mesh and the springback mesh respectively, and the number of nodes of the two meshes is required to be the same. 3) Use the Compensator technology to automatically obtain the deformation data of the rebound to determine the displacement area as shown in Figure 4-6. Previous page next page Screwdriver Bit,Best Screwdriver Bits,Best Screwdriver Bit Set,Magnetic Screwdriver Bits henan horn tools co.,ltd. , https://www.hornhandtools.com