Fingerprint attendance machine notes

1. Employees must use their fingerprints to register for attendance.

2. Keep fingerprints clear, and do not use fingerprints that are too much peeling, too dry, too wet, and too dirty for attendance.

3. The finger should be placed in the middle of the fingerprint collector, evenly press hard, and leave when you hear (thank you, show the job number).

4. Cannot use unregistered fingerprints for attendance.

5. Each employee repeats the attendance within 10 minutes on the attendance machine and only remembers the first valid attendance time.

6. During normal commuting, you must attend time and attendance on time, and you must not attend the rest of the time, otherwise the attendance machine will be processed early or late. (Except for those who have gone out in the middle of the road) Attendance advance/timeout 60 minutes attendance as invalid data processing (except overtime).

7. If you find the attendance machine when attending the attendance, please press the power button â—Ž in the bottom left corner to attend the attendance. * When taking the time and attendance, you can use the following figure as an example: You can't put your finger on the side or put your finger on it. The following incorrect methods are:

a) not in the center

b) The finger is not flat pressed

c) finger side press

d) Finger pressing force is not enough, according to the law

Solenoid Armature Tube OD 12mm

BRANDO is a Solenoid Valve Armature Plunger manufacturer and exporter in Ningbo, China, which has more than 10 years experience.

The armature assembly or anchor system is the very important component of Solenoid Valve. An internal stainless steel plunger moves up and down to seal on the top and bottom valve seats. Brando provides armatures in multiple sizes depending on the application's flow requirement. Four common pneumatic functions are available which include:

1. 2/2 normally closed(NC),
2. 3/2 normally closed(NC),
3. 2/2 normally open(NO),
4. 3/2 normally open(NO).

The seals in the plunger are NBR (standard), but FKM, HNBR, PTFE, EPDM are available for different media and temperatures. Most of our armatures are designed to accept AC and DC voltages. Some armatures are DC only for low watt applications.

Brando offers flexibility as the connection to the seat cavity can be with a thread/o-ring seal style or o-ring flange style that requires a mounting plate.

Solenoid Armature Tube Assembly, Solenoid Valve Armature Core, Solenoid Valve Coil Core

NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com