The proper choice of metering pump should pay attention to several elements
Moving Walkway,Curved Escalator,An Escalator,Electric Escalator MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com
July 25 07:00:53, 2024
What information is needed to properly select the metering pump? 1. The flow rate of the liquid being measured. 2. Measured the main characteristics of the liquid, such as chemical corrosion, viscosity and specific gravity. System back pressure. 4 suitable suction height. 5. Other options required, such as analog control, pulse control, flow monitoring and timer. What are the main advantages of the electromagnetic drive metering pump? Electromagnetic drive metering pump has only one moving part - the armature shaft. Generally, the less moving parts, the more reliable the metering pump works. Metering pump is ideal for low-flow, low-pressure workplaces, and good compensation in the supply voltage fluctuations. What are the advantages of metering pumps with fixed stroke length and varying frequency compared to metering pumps with fixed frequency and varying stroke length? With this correction, the dosing amount per stroke is known. The total dosage can therefore be calculated (dosing = dosing per stroke * frequency). The total dosage is linear with frequency (50% frequency = 50% dosing). Through external pulse or analog control, dosage can be transferred from minimum to maximum in one second. In addition, it is much less costly than motor-driven stroke length adjustment. How to use the dosing pump performance graph? 1. Find the performance graph corresponding to the dosing pump selected. 2. Indicate the current back pressure in the chart below. 3. Determine the correction factor, taking the backpressure value in bar, up to the curve, and read the correction factor vertically left at the intersection. 4. Divide the required dosage value by the correction factor to give the value in ml / min. Or L / h. Put the calculation result in the middle of the dosage scale. When placing this value on the dosing scale, a ruler can be used to find the stroke length setting and stroke frequency setting.