Relevant regulations for the programming of CNC machine tools (2)
(3) Feed function word. The feed function word is used to specify the speed at which the tool moves relative to the workpiece. Its unit is generally mm/min. When the feed speed is related to the spindle speed, such as threading, tapping, etc., the unit used is mm/r. The feed function word is preceded by the address character "F" followed by a string of numeric codes. Specifically, there are several ways to specify: 1 Three-digit code method: F followed by three digits, the first digit is the integer digit of the feedrate plus "3", the last two digits are the first two significant digits of the feedrate. For example, the feed rate of 1728 mm/min is specified by F717; the feed rate of 15.25 mm/min is specified by F515; the feed rate of 0.1537 mm/min is specified by F315. 2 Two-digit code method: For the two-digit code followed by F, the speed table corresponding to 00-99 is specified. Except for 00 and 99, when the digital code is incremented from 01 to 98, the speed is increased by the proportional relationship. of. The 20th root of the scale factor is 10 ( ≈ 1.12), that is, the adjacent rear speed is increased by about 12% from the previous speed. For example, F20 is 10mm/min, F21 is 11.2 mm/min, F54 is 50 mm/min, and F55 is 560 mm/min. The feed rate comparison relationship of F00-F99 is shown in Table 2. Table 2 Two-digit digital feed rate comparison table mm/min Code speed Code speed Code speed Code speed Code speed 00 stop 20 10.0 40 100 60 1000 80 10000 01 1.12 twenty one 11.2 41 112 61 1120 81 11200 02 1.25 twenty two 12.5 42 125 62 1250 82 12500 03 1.40 twenty three 14.0 43 140 63 1400 83 14000 04 1.60 twenty four 16.0 44 160 64 1600 84 16000 05 1.80 25 18.0 45 180 65 1800 85 18000 06 2.00 26 20.0 46 200 66 2000 86 20000 07 2.24 27 22.4 47 224 67 2240 87 22400 08 2.50 28 25.0 48 250 68 2500 88 25000 09 2.80 29 28.0 49 280 69 2800 89 28000 10 3.15 30 31.5 50 315 70 3150 90 31500 11 3.55 31 35.5 51 355 71 3550 91 35500 12 4.00 32 40.0 52 400 72 4000 92 40000 13 4.50 33 45.0 53 450 73 4500 93 45000 14 5.00 34 50.0 54 500 74 4500 94 50000 15 5.60 35 56.0 55 560 75 5600 95 56000 16 6.30 36 63.0 56 630 76 6300 96 63000 17 7.10 37 71.0 57 710 77 7100 97 71000 18 8.00 38 80.0 58 800 78 8000 98 80000 19 9.00 39 90.0 59 900 79 9000 99 high speed 3 One-digit code method: For CNC machines with less speed, F can be followed by a digit, ie 0-9, corresponding to 10 predetermined speeds. 4 Direct specification method: Just like the coordinate displacement in the dimension word, write the required feedrate directly after F in the predetermined unit. (4) Spindle speed function word. The spindle speed function word is used to specify the spindle speed in r/min, which is preceded by the address character S followed by a string of numbers. It can use the three-digit, two-digit, one-digit code method or direct designation method as the F-first feed function word. The meaning of the numbers, the division method and the comparison table are common to the feed function word. Just change the unit to r/min. (5) Tool function word. When the system has a tool change function, the tool function word is used to select the replacement tool. The tool function word is headed by the address character T, and is usually followed by two digits, representing the tool number. (6) Auxiliary function word. The auxiliary function word is preceded by the address M, followed by two digits (M00-M99). The provisions of the ISO1056 standard for the auxiliary function M are shown in Table 3. This table is equivalent to the provisions of the M-function in China's standard JB3208-83. These auxiliary functions include: specifying the steering and starting and stopping of the main shaft; specifying the opening and stopping of the system coolant; specifying the clamping and loosening of the machine; specifying the fixed straight line and angular displacement of the table; etc.; indicating that the program stops or the tape ends, etc. . Some auxiliary functions not specified in the standard can be selected for special purposes. When designing a machine tool numerical control system, select some of the auxiliary function codes required by the system in the M code specified by the standard as the basis for the part of the circuit design and future programming. Previous page next page Chemical Pump,Chemical Dosing Pump,Chemical Transfer Pump,Chemical Injection Pump Hengshui Yuanhan Trading Co.,Ltd , https://www.hengshuiyuanhanpump.com
(2) Coordinate function word. The coordinate function word (also known as the size word) is used to set the displacement of each coordinate of the machine. It generally uses X, Y, Z, U, V, W, P, Q, R, A, B, C, D, E and other address characters as the first, followed by the address character followed by "+" (positive) or " —†(negative) and a string of numbers, usually in units of system pulse equivalents, without the use of a decimal point. When there are multiple size words in a block, they are generally arranged in the order of the above address characters.