According to the "new national standard", the corners of children's furniture products need to be rounded, the cabinet-type closed furniture should be reserved for vents, and children's furniture should be posted with warning signs at appropriate locations. Purchase reminder:

Check the structural safety of children's furniture

According to the "new national standard", when purchasing children's furniture, parents should check whether the edges and corners of the children's furniture are rounded, and the dangerous outer corners of the product that are below 1600 mm above the ground should also be rounded , And the rounding radius is not less than 10 mm, or the rounding arc length is not less than 15 mm.

The new regulations stipulate that products have air-tight closed spaces, and vents should be provided inside. If the product does not have an exit hole, the manufacturer should be carefully consulted and purchased carefully.

Request a quality inspection report

When purchasing children's furniture , be sure to check whether there is a test and identification of the finished product on the quality inspection book. If consumers pay more attention to the content of heavy metals, you can check whether the product meets the two standards of GB18584-2001 "Limit of harmful substances in interior decoration materials and wooden furniture" and GB28007-2011 "General technical conditions for children's furniture", and ask the merchant for metal content Check the report and check the heavy metal content. The lower the heavy metal content, the less harmful it is to children. It is also necessary to pay attention to whether the test object is a simple board or paint. If the test is only for plates, consumers also need to understand the environmental protection of the paints used by manufacturers.

Choose furniture with less adhesive

Many qualified products of sheet metal can often detect the unqualified content of formaldehyde and other heavy metals, which is caused by the unenvironmental protection of coatings and adhesives outside the product. Therefore, it is best to choose furniture with a small amount of binder, which has a relatively low formaldehyde content. If you have doubts about the product's paint, it is best to choose solid wood and wood-colored furniture as much as possible to reduce the hazards of heavy metals contained in unqualified paint.

Can complain according to regulations

When buying furniture , consumers try to choose furniture that will be on the market some time after the implementation of the new standard, because manufacturers will have a certain amount of inventory before the implementation of the new standard. Consumers may complain to the Consumers Association or the National Quality Inspection Department for injuries caused by product quality problems or designs that do not meet the standards. (Editor: Peter)

Painter Cover Fleece

Absorbent Flooring Painter Cover,Painter Cover Fleece,Recycled Painter Cover Fleece,Anti Slip Painter Covering

Suzhou Surface Protective New Material Technology Co.,Ltd , https://www.surfaceprotective.com