Hot water geothermal power generation
1) Flash system When the high-pressure hot water is pumped from the hot water well to the ground, part of the hot water boils and “flashes†into steam due to the pressure drop, and the steam is sent to the steam turbine for work; and the separated hot water can be continuously used for discharge, of course, it is better to Back into the formation. 2) Double circulation system The geothermal water first flows through the heat exchanger, transferring the geothermal energy to another low boiling working fluid, causing it to boil and generate steam. After the steam enters the steam turbine to work, it enters the condenser, and then passes through the heat exchanger to complete the power generation cycle. The geothermal water is injected into the ground from the heat exchanger. This system is particularly suitable for geothermal resources with high salt content, high corrosivity and high non-condensing gas content. The key technology for developing dual cycle systems is the development of efficient heat exchangers. Screw Type Expansion Anchor Bolts Stainless steel expansion anchor bolt, Expansion anchors in stainless steel, approved for cracked concrete, non-cracked concrete and seismic – including stud anchors and sleeved anchors, all the products are made of stainless steel 201 304 316, which provides strength and better corrosion resistance. Also with plain surface,no finish and no coating. Our products perform all kinds standard, such as DIN,ANSI/ASME ISO,JIS,Customized. Screw Type Expansion Anchor Bolts,Long Expansion Bolts,Expansion Screw Anchor,Expansion Anchors Taizhou Wanluo Hardware Products Co., Ltd. , https://www.wlhardware.com