Estimated duration of wooden doors and windows

The wooden door and window project is a project that is more time-consuming than the demon in home decoration. The construction should be started after the construction of the foundation and the construction is completed before the completion of the project. The specific construction period is two days for making a Meixinmen carpenter, one day for the renovation, one half day for the installation (including hinges, locks, door stoppers, etc.), and one day for the finish paint and the rest for the process. waiting time.

Construction and acceptance of wooden lattice ceilings

1. The role of wood grille ceiling

The wooden grille ceiling is different from other ceiling projects and should be attributed to the joinery decoration. The wooden grille ceiling is a method that is commonly used in home decoration corridors, entrances, restaurants, and large roof beams.

Wooden grille ceiling can not only beautify the top, but also can achieve the purpose of adjusting lighting and increasing the overall decoration effect of the environment. It requires generous design, reasonable structure, beautiful appearance, firm fixation, smooth surface, uniform color, scientific layout of internal lighting, complete paint finish, no scratches, no pollution, etc.

2 wooden grille ceiling installation

The production of the wooden grille skeleton should be based on the accurate measurement of the roof size. The keel should be finished, the surface should be planed, the joint should be opened, and the horizontal and vertical keel joints should be opened with a half-groove joint. The flame retardant coating should be applied.

During the installation, according to the design, the elevation control line and the suspender installation line shall be popped. The wooden mold shall be drilled on the wall surface and the ceiling, and the ceiling hanging piece shall be fixed on the inner hook of the keel with a thick wire. When the installation is completed, the integral lifting method is adopted to move the wooden grille frame as a whole above the elevation line and connect it with the hanging piece on the ceiling. After all the hanging pieces are connected with the grille frame, the grille surface is leveled by adjusting the length of the hanging piece. After adjusting the grille frame to be level with the control line, fix the surrounding wooden keel to the wall.

The surface treatment of the wooden grille skeleton surface is generally to paste more valuable wood thin pieces, install the lighting fixtures and close the decorative lines, the lamp base can be installed during the production of the wooden grille skeleton, and the power is turned on after the hoisting. The grille frame trim strips should be installed on the ground, and the ceiling installation should be followed by a closed line seal. After the wooden grille is installed, it is necessary to apply a clean oil coating to the finish, and then install the frosted glass after brushing.

3. Common quality problems and treatment methods for grille ceilings

The common quality defects of wooden grille ceilings are uneven or irregular grid grids, uneven surface, collapse, and arching. The grid is uneven or not square, mainly due to the fact that the foundation walls are not square or the vertical and horizontal grille openings are not vertical. Therefore, before installing the wooden grille skeleton, deal with the foundation wall to find the square, first use the ruler to measure the angle and the angle of each side, if the error is not large, you can use the putty to shave the wall to find the square, if the error is large, You should first pad the board and then level it with putty. When splicing vertically and horizontally, the keel grid must be vertical. Otherwise, it should be repaired and installed.

The main reason for the unevenness, collapse, and arching is due to the fact that, in addition to lax sticks during construction, wood deformation, too thick frosted glass, and heavy lighting fixtures are also important reasons. Therefore, in the construction should choose not easy to deformation of the loose surgery skeleton, frosted glass with a thickness of 3 mm is appropriate, lighting can be installed on the ceiling or choose light materials to prevent overloading the ceiling load. If there is arching, the hanging parts can be adjusted so that the top surface is flat.

4. Estimated duration of wooden grille ceilings

The wooden grille ceiling is a relatively labor-intensive and complicated project, involving many materials, preparation and production time is longer. After the installation, the surface paste, surface brushing, and glass installation need careful operation, detailed construction, and more man-hours. The technical level is higher. The wooden grille ceiling is about 15 square meters. It takes about 10 days from the start of stock preparation to the completion of the work. The dragon skeleton is processed and manufactured for 2 days. The stock preparation and installation are 2 days. The decorative decoration is 3 days. Others are waiting time for the craft. Intersection with other woodworking or parallel operations.

The duration will vary depending on the degree of structure and the use of materials.

Door and window acceptance glass lighting decorative window decoration design glass glass door grille restaurant ceiling

LED Tube Light

LEDER technology`s LED grows tube is the perfect lighting solution. Our tube light fits any standard fluorescent lighting fixture, allowing for easy conversion of a standard light into a grow light. LED tube light is energy efficient, operating at only 18W and has low heat output keeping your plants cool. Our LED tube light emits full-spectrum light, simulating natural light and helping your plants grow faster.

This clear LED tube lights offer high efficiency without the large power consumption. Instant energy savings: No longer worry about the cost of your electricity bill or how often you will need to buy new lights for your home or workspace.

Features:

• Long service life

• Adopt wide voltage, constant current current

• Quality assurance

• Power box fixed, stable performance

• Stable voltage, energy saving and environmental protection

• Color temperature :3000k-6000K

• Variety of styles, seamless connection

• Type of protection: IP20 /IP65 (Some models)

• Warranty:3 - 5 years

The standard 4-foot fluorescent tube only offers a 13,000 hour lifetime, which makes our strip LED light tubes more than 3x longer lasting. This LED tube light is easy to install.We have rich production experience in lighting. Except LED Tube Light, we also offered other product in Indoor Lighting .Such as : LED Downlight , LED Panel Light, Track Light , Linear Light , LED Strip Light ,LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .

LED Fluorescent Light,LED Fluorescent Tube,LED Fluorescent Replacement,LED Tube Light Fixture

JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.walllightoutdoor.com