The tin suction line is a special maintenance tool. Its appearance greatly reduces the time for rework and repair of electronic products, and greatly reduces the risk of thermal damage to circuit boards. Sophisticated design ensures maximum surface tension and ability to absorb tin. The optimized heat transfer from the braided wire to the solder joints accelerates the speed of brazing. Very little flux remains, and it also makes the PCB cleaning process faster, and can even cancel the cleaning process completely. Let me introduce you to the usage of tin wire.

 

　　 Usage of suction wire

 

It is used to absorb excess solder when removing tin. It is resistant to oxidation and corrosion. It has good thermal conductivity and good tin absorption. During desoldering, after the chip is removed, there will be a lot of solder on the circuit board, which will affect the soldering of the chip. It is usually cleaned with a tin suction tape. The method is to place the soldering iron on the tin suction tape and slowly move it on the chip pad. When the solder melts, it will be sucked up by the tin suction tape. The printing plate is very clean. Afterwards, it is best to wash the position of the chip on the machine board thoroughly with washing water. In the tin removal tool, the tin suction device can be used for general aluminum electrolytic capacitors and the like, and the tin suction tape can be used for relatively large chip components.

 

　　 Advantages of tin wire

 

The tin-absorbing wire is refined with pure copper and special chemical formula to ensure fast, good and economical. It reduces the time for rework and repair of electronic products, and also greatly reduces the risk of thermal damage to the circuit board. The precise geometric weave design ensures the maximum surface tension and tin absorption capacity. The tin braided wire has optimized heat transfer from braiding to solder joints, thus accelerating the speed of tin absorption. The minimal residue also speeds up the PCB cleaning process and can even cancel the cleaning process altogether.

 

　　 Tips for using tin wire

 

1. Before removing tin using the tin suction wire, please hang a small amount of pre-solder on the soldering tip.

2. Increase the contact area between the welding tip and the tin suction wire to speed up the heat transfer.

3. Before use, the tin suction wire can be slightly pulled apart to promote the smooth operation of the tin suction operation.

4. When sucking the solder in a narrow place, in order to speed up the heat conduction, please keep a little solder at the front end of the sucking wire and cut it at a 45 ° angle.

5. Choose the welding tip without oxidation.

6. Before use, confirm whether the tin absorption wire is oxidized. Once the tin wire is oxidized, it is difficult to remove the solder. Before use, please cut off the tin-sucking wire used last time, and then carry out the tin-sucking operation.

7. Try to use an integrated electric soldering iron with good heat recovery.

The above is the content about the advantages of tin wire and the usage of tin wire. In specific operations, you must not touch the nozzle holder and the tin suction box to avoid burns. Do not heat for a long time to avoid damage to the substrate or parts.

HR STONE mainly produce three kinds of Translucent Onyx Panels:

1. Blue Sodalite

2. Tiger Eye

3. Agate

Surface finish: polished

Size : normally 240*120*2cm

thickness : 2cm (normally 0.5cm blue sodalite +1.5cm natural commercial stone or artificial  stone/glass/Acrylic);

Appliccation: as wall tiles, Translucent Stone Panels, Backlit Onyx Wall Panels, table top, countertop, arts-..

Color: natural blue, yellow, grey, colored agate

Effect: translucent or no translucent

Tiger Eye and Blue Sodalite from our mine in Africa .

HR Stone company invest blue sodalite mineral quarry in Africa, The sodalite rock in Africa that also contains abundant blue sodalite and white nepheline. Both of these minerals have a hardness of approximately 6 on the Mohs hardness scale.

Our quarry start to yield two kinds of Blue sodalite blocks, big size blocks, small size blocks in 2018. Max size of big block can be about 250*180cm and weight about 15-20 ton per block. Small block has two sizes: 3-10cm 10-30cm . Annual yield of blocks is about 100containers.We also have two blue sodalite color classifications, one is blue mainly, one is blue and white mixed.According to the color purity and texture, the blocks have different ranks for your reference.

We ship the blocks to China and produce them into finished products, such as translucent blue sodalite slabs, table top and arts. Whether super blue color or blue and white mixed, you can find out the right color you favor from our blue sodalite blocks and finished product.

      Tiger Eye slab  has super yellow color and commercial rank for your choice.

 Agate has natural grey and colored yellow, purple, brown, red-

Semi Precious Stone Slab

Semi Precious Stone Slab,Semi Precious Stone Table Top,Agate Table Top,Semi Precious Stone Coffee Table

Fuzhou HuaRen International Imp&Exp.Co,Ltd , https://www.huarenstone.com