The maintenance and maintenance methods of the filter are as follows:

●, coarse filter

1. The core part of the filter is the filter core piece. The filter core is composed of a filter frame and a stainless steel wire mesh. The stainless steel wire mesh is a suitable part and needs special protection.

2. When the filter works for a period of time, certain impurities are precipitated in the filter core. At this time, the pressure drop increases, the flow rate will decrease, and the impurities in the filter core need to be removed in time;

3. When cleaning impurities, pay special attention to the stainless steel wire mesh on the filter core can not be deformed or damaged. Otherwise, the filter will be installed again. The purity of the filter will not meet the design requirements, and the compressor, pump, instrument and other equipment will be damaged. To destruction

4. If the stainless steel wire mesh is found to be deformed or damaged, it needs to be replaced immediately.

●, precision filter

1. The core part of the precision filter is a filter element. The filter element is made up of special materials, which are suitable parts and need special protection.

2. When the precision filter works for a period of time, the filter element blocks a certain amount of impurities. At this time, the pressure drop increases, the flow rate will decrease, and the impurities in the filter should be removed in time, and the filter element should be cleaned at the same time;

3. When removing impurities, pay special attention to the precision filter element, and it must not be deformed or damaged. Otherwise, the filter element installed again will not meet the design requirements after filtration.

4, some precision filter elements, can not be used repeatedly, such as bag filter, polypropylene filter, etc.;

5. If the filter element is found to be deformed or damaged, it needs to be replaced immediately.

Rectangular Tubes

Tianjin Alcoa International Trade Co., Ltd. , https://www.tjalcoa.com