When consumers buy solid wood flooring, they often get dizzy with different types and prices, picking and picking, but do not know exactly what to buy. According to experts, in fact, picking hardwood flooring, just pay attention to several aspects, you can worry-free to buy a good floor for your family.

Shuaibang Design      Tong Ji . Yu Run

- As a natural material, the shrinkage and deformation of wood is unavoidable. Choose wood and wood flooring as far as possible to select trees with relatively stable wood properties, such as teak, pineapple (mercitona), eucalyptus, and yala (Palau). Wood kidney beans and other species.

——Choose color and wood grain, many people think that the harder the wood, the better. In fact, hard wood, although with good abrasion resistance, but relatively poor dimensional stability, in the size of solid wood flooring In the selection, try to choose narrow and short, although the effect of laying is not as wide and short as the floor is beautiful, but in terms of the characteristics of wood, the smaller the size, the smaller the deformation.

——The inspection of appearance quality and processing precision shall check whether the floor has bugs (not more than 1 mm), cracking, decay, mildew, dead knots and other defects. For small living quarters, the color difference should not be too demanding. This is the natural property of wood. The simple test of processing precision is to randomly collect 8 to 10 floors on the site and place it on the flat surface to assemble it. Touch the hand to see if the precision of the processing quality and the degree of finish are smooth. Whether the board and the board are tightly jointed (the joint gap should not be Greater than 0.3 mm), whether there is a clear difference in height.

- Wood floor moisture content is a crucial indicator. How should consumers judge? Try to choose floorings made by manufacturers that are close to the local temperature and humidity. With the on-site simple water content analyzer, select the floor samples of the purchased products displayed by the manufacturer to measure, and then test the moisture content of the purchased floor. If the difference between the two moisture contents is between 1% and 2%, it is a normal range. can be purchased.

——When purchasing paint flooring, it is also necessary to see whether the paint film on the paint board surface is even, plump, smooth, without paint leakage, blisters, holes, pits, etc., and the generally more wear resistant paint floor is burned with a cigarette. Seconds, the paint surface should not leave obvious traces. When choosing a paint floor, the thickness of the paint should be moderate. If the surface paint is too thin, the wear resistance of the floor is poor. Excessive film thickness will reduce adhesion.

Relevant experts reminded us that we have mastered the purchase of outstanding ideas and careful identification at the time of purchase, although we can reduce the possibility of being taken advantage of. However, choosing reputable merchants and keeping purchase vouchers is the best way to safeguard their rights.

Floor purchase building materials knowledge nature floor paint

Solar Panel

Mono Solar Panels,Poly Solar Panels,HJT, BIPV, Double Glass,Small Solar Panel,Solar Cell Panel

Jiangyin Haoxuan Technology Co., Ltd. , https://www.haoxuan-tech.com