Samit Tiles believes that everyone is not unfamiliar with it. This product can meet the needs of consumers regardless of its use or suit. Therefore, it is best to choose according to your own preferences and functional requirements of the room. Choose. The following Xiao Bian came to give you a brief introduction of the Samit tile and how to identify the quality of the tiles.

Where is the Samite tile

1 Tile This product is made of fire-resistant metal oxides and semi-metal oxides, which are then ground, mixed, pressed, glazed, and sintered. This product is made of clay and quartz. Sand and other mix.

2, depending on the use of points: its type is still more, there are exterior wall tiles, interior wall tiles, floor tiles, square tiles and other products, such as the reduction of ceramic tiles by the application of glaze: then there are divided into glazed tiles, unglazed brick.

3, size: This product is relatively small size of its relative size, use it to help you save construction time, relative to the posted neat appearance.

4, water absorption: to know that low water absorption tile this product will not make it because of climate change cracking or peeling phenomenon.

5, flatness: compared to a good flatness of the tile, and its surface is not curved, no Qiaojiao, construction is relatively simple, it gives the appearance after construction is also very flat.

6 Strength: The flexural strength is relatively high. At the same time, it is also a product with better abrasion resistance, and it is also not easy to wear. It can be said that it is also very suitable for use in public places.

7, color: you can put the tiles on the floor, so you can compare them, if you can see with the naked eye they have color, so the effect of the shop does not look good, causing aesthetic barriers.

How to distinguish the quality of tiles

1, see the appearance

When choosing a tile, its color must be uniform. At the same time, the surface finish and flatness of the tile must be better. You can also observe its surrounding rules. The pattern is complete. You can extract 4 or 5 slices from the box for comparison. You know.

Listen to the sound

You can consider tapping with a hard object. If the sound you heard is crisp, then the higher the degree of porcelainity, the better the quality. Can also use this method, is the left hand thumb, index finger and middle finger clip a corner of the tile, you can easily hang it down, this time if you hear the clear, sweet sound, then it shows that the top grade, such as sound dull, stagnation, then It represents the next product.

3, drip test

Can also use this method, can be on the back of the water droplets, according to the speed of infiltration after the water to determine the dissolution, in general, the slower the water absorption, it can show that the density of this tile is greater; the other hand, water absorption The faster it is, the less dense it is, and the better than the former.

4, ruler

The higher the accuracy of the tile side length, the better the effect of sticking out. Relatively speaking, buying a high-quality tile is not only easy to construct, but the most important thing is that it can also save man-hours and accessories.

Summary: Regarding the quality of Samit tile and how to distinguish the quality of ceramic tile, Samiite tile still has many unique advantages, so it has been deeply liked by consumers, but it still has to be referenced in the selection. The above points come. I hope that the above introduction will help everyone.

Perforated Metal

Round Holes Perforated Metal Sheet

Perforated metal Sheet is also called perforated plate or punched metal plate.Perforated Metal Sheet can be offered with various hole shape, and we can recommend suitable hole size according to your request on hole shape and open area.

Diameter: 0.5 -100 mm

Sheet Thickness: From 0,3 mm to 10mm

Size: 1000mm*2000mm 1220*2440mm 1500*3000mm Customized size can be available.

Material :Carbon steel, Aluminum, Stainless steel ,Galvanized steel etc.

Packaging: Wooden crates or pallets

Productivity: 200 square meters per day

MOQ:5pcs or negotiated

Applications:

Architectural screen

Filters

Guard grills

Heavy mining machinery

Metal ceilings

Agricultural separation

Product Advantage:

1. Easy to process and shape. 2. Easy to install.

3. Can be painted or polished. 4. Attractive appearance.

5. Plates of various thicknesses. 6. Multiple choice of aperture and arrangement.

7. Good sound absorption effect.

Perforated Metal,Perforated Sheet Metal,Stainless Steel Perforated Metal,Galvanized Steel Expanded Metal

HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com