1. How to install the card reader driver?

A separate card reader does not require an additional driver in the XP system.

The built-in card reader in the notebook generally needs to install the driver. For example, the driver for FlashMedia. If there is a driver disk, run the driver inside the driver disk; if it is not the setup driver, right-click the card reader device with an exclamation point or question mark in the device manager, upgrade the driver, and specify the driver path.

2. Does the reader driver have to match the model of the computer?

The card reader is originally for the computer to successfully read and write different storage media, so basically do not need to drive, if the card reader is not recognized on the computer, it may be a problem with the computer USB interface, you can change a USB interface Try, if the front USB interface is not recognized, it may be insufficient power supply, you can try to plug in the rear USB interface of the chassis to try.

3. Why can't the card reader read the memory card?

Generally, the memory card is not in good contact with the card reader. The computer only recognizes the card reader and is not connected to the memory card. If the memory card is inserted, the indicator of the card reader will flash a few times after the memory card is connected. This is the case with many readers.

There is a semiconductor and USB slot in the card reader, but the contact is worn out due to the repeated insertion and removal of the card reader, so the contact is bad! So the card can be read out! But the chance is very low! You can buy it. A expensive card reader! For example, the multi-function card reader directly eliminates the contact caused by wear and tear!

Drywall Screws

Coarse Drywall Screws, Black Drywall Screws, Bugle Head Drywall Screws

Ningbo Brightfast Machinery Industry Trade Co.,Ltd , https://www.brightfastener.com