What are the installation methods for gypsum board?

Gypsum board is a kind of decorative board which is often used in the ceiling of modern home decoration. The gypsum board needs certain methods and precautions during the installation process, so as to ensure the installation effect is good, what are the gypsum board installation methods? ? What should I pay attention to during the installation process?

Gypsum board installation method and precautions:

1. Select the type of gypsum board according to the environment and conditions. For kitchens, bathrooms and other wet rooms, waterproof gypsum board should be used, or it should be used after moisture-proof treatment on the surface of ordinary gypsum board to ensure that it has certain waterproof performance in the future use.

2. Gypsum board ceiling construction should be carried out after plastering on the wall. When the partition wall adopts the gypsum board light steel keel wall, if the partition keel directly reaches the bottom of the floor, the ceiling installation should be after the partition wall is installed. If the partition keel is only to the ceiling elevation, the ceiling keel should be installed first. The indoor floor construction should be completed before the installation of the ceiling to avoid deformation of the gypsum board caused by the large amount of moisture generated during the ground construction.

3. The following two methods can be used for gypsum board installation:

1), direct paste installation: the roof is repaired smooth, flat, and then the plasterboard is directly attached to the roof with adhesive. If the gypsum board is too long to be cut, start from the front and then cut the back paper so that the cutting edge is straight.

2), screw flat installation: if using wooden keel gypsum board, can be fixed with galvanized round nails or screws and keel, nail holes filled with putty, and then painted with the same color as the board surface; such as U-shaped light steel keel The gypsum board can be fixed with galvanized self-tapping screws and keel.

Global hardware network

Concerned about surprises

Label: What are the installation methods for gypsum board?

Previous: The working principle of automatic sensing door Next: Six skills and methods of pneumatic tool maintenance

Led Emergency Lights

Emergency Lighting System,Emergency Lights For Home Power Failure,Rechargeable Emergency Light,Led Emergency Lights

Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com