Aluminum alloy lift safety use operating procedures
Insect Killer Tube,T8 Bl Tube,T8 Bl Lamp,T8 Bl Bulb Changxing leboom lighting product CO.Ltd. , https://www.leboomuvd.com
(1) Because the long-distance transportation or placing time is too long, it is necessary to carefully inspect the hydraulic piping and electrical system to ensure that the hydraulic piping, joints are not leaking and the electrical wiring is free from loosening.
(2) Open the legs, the legs should be fully open to the baffle position, and support on a solid ground, if necessary, can use sleepers, through the legs to adjust the level of the screw.
(3) Point and press the “Lift†control button on the electric box below the lifter. Press the “Stop†button on the electric box when the height is raised to about 5 meters to check the hydraulic lines, joints and electrical appliances. Whether there is leakage and scraping and pressure on the line, ensure that the elevator can be lifted to the maximum height of the elevator after being vertically vertical (visual inspection can be performed).
(4) Tap and hold the "Drop" control button on the power box below the lift to lower the lift. After the third trial run operation 1-3 times, it is confirmed that there is no abnormality before carrying out the lifting work.