LED enterprise capital chain breaks SMEs on the brink of extinction

For LED companies, the company has closed down. The direct cause is only two points. The enterprise capital turnover does not lead to insolvency. Or to put it another way, the scale of business operations is small, financing is difficult, and in the economic tide, the market can not withstand the "big winds" and eventually become a "small wave" in the industry reshuffle.

A few days ago, Shenzhen Leixing Photoelectric Co., Ltd. closed down. Coincidentally, Shenzhen Yiguang Technology Co., Ltd. also fell into a crisis of bankruptcy.

“The main reason for the collapse of Lei Xing Optoelectronics and Shenzhen Yiguang is the break of the capital chain.” Wu Chaoguo, an industry researcher at the China Merchants Information Industry Research Institute, interviewed by the reporter, said that in fact, some enterprises in the LED industry have broken their capital chains and are not doing well. When the whole industry enters the integration stage, the reshuffle will be more and more important.

The collapse of the LED company seems to be related to the arrearage of the supplier's arrears, or the debt chain is not coming back, etc., resulting in a broken capital chain, which ultimately leads to the company's insolvency. In fact, the collapse of the above two LED companies is only a "small shrimp" shuffled under the wave of market economy. Many companies with billions of companies, such as Duo Duoli, Bolunte, Vision Optoelectronics, etc., which have closed down due to the capital chain, seem to have become a common problem in the entire industry.

According to Qiu Mingliang, a researcher at the China Research Institute, the LED market is saturated. The industry is eager for quick success, overcapacity, and vicious competition. Various companies are mixed, and everyone is insisting that even if they lose money, they must be produced. In the entire industry, most of the small and medium-sized enterprises are doing downstream LED lighting products, and small workshop factories are everywhere. Due to the relatively low capital requirements for terminal enterprises, the entry barrier has made the competition in this field extremely fierce.

According to industry statistics, there are more than 10,000 companies engaged in LED lighting in the country. In the first half of 2013, the capacity utilization rate of domestic LED lighting companies was only about 60%.

"In this market situation, the LED industry has once again become the fragrant scent of capital. Like Shanxi Coal, Furi Electronics, BYD, etc. have entered the LED industry." Qiu Mingliang told reporters.

On the surface, it seems that the direct cause of the collapse of LED companies caused by the break of the capital chain, is this really the case?

Wu Chaoguo told reporters that in recent years, the LED display industry has developed rapidly and the state has vigorously supported it. Under many temptations, enterprises have joined the market. In Shenzhen, enterprises participating in the LED demonstration project of government investment projects will be given a subsidy of 10% according to the price of the lamps and a discount of 3 years. For enterprises that undertake the LED application demonstration project of enterprise investment projects, 30% subsidy will be given according to the price of the lamps.

"On the one hand, the government has vigorously supported the LED industry. On the other hand, due to the immature technical conditions, products cannot be promoted to a larger market. Finally, government procurement has become the only sales channel for LED companies, forming a vicious circle." Wu Chaoguo believes.

From the current point of view, the pattern of companies engaged in the LED industry seems to be more and more clear in the market. On the one hand, the leading enterprises in the industry are making more profit in the case of favorable policies. Some powerful “outsiders” are also optimistic about the future prospects of LEDs and gain a share in the industry; on the other side, there are more and more small enterprises with no technology because of the whole The overcapacity in the industry has led to a break in the capital chain and forced to squeeze out the market.

Qiu Mingliang believes that in the future, the market share will be more and more concentrated in enterprises with brands, channels and innovations. The industry will face reshuffle, and there may be a large number of SMEs withdrawing from the competition.

Wu Chaoguo said that how to improve consumer awareness, innovative technology and establish reasonable industry standards is still a key issue for the entire LED industry. Enterprises should not blindly pursue profits in the long-term development, find their own market positioning, locate their own products, plan the development route of enterprises, do their own product quality, and control the funds of their own enterprises. Do not blindly expand the production scale of enterprises. Can be healthy growth.

Threaded Fittings

China Threaded Fittings,Pipe Threaded Fittings supplier & manufacturer,

Size: 1/2''~6''

Class Rating: 3000~6000

Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)

TG(tongue and groove face);MFM(male and female face)

Manufacturing process: Push, Press, Forge, Cast, etc.

Material:

Carbon steel:

ASTM A105;

ASTM A266 GR.1,GR.2,GR.3,GR.4

Stainless steel:

304/SUS304/UNS S30400/1.4301

304L/UNS S30403/1.4306;

304H/UNS S30409/1.4948;

309S/UNS S30908/1.4833

309H/UNS S30909;

310S/UNS S31008/1.4845;

310H/UNS S31009;

316/UNS S31600/1.4401;

316Ti/UNS S31635/1.4571;

316H/UNS S31609/1.4436;

316L/UNS S31603/1.4404;

316LN/UNS S31653;

317/UNS S31700;

317L/UNS S31703/1.4438;

321/UNS S32100/1.4541;

321H/UNS S32109;

347/UNS S34700/1.4550;

347H/UNS S34709/1.4912;

348/UNS S34800;

Alloy steel:

ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;

ASTM A182 F5a/F5/F9/F11/F12/F22/F91;

ASTM A350 LF1/LF2/LF3;

Duplex steel:

ASTM A182 F51/S31803/1.4462;

ASTM A182 F53/S2507/S32750/1.4401;

ASTM A182 F55/S32760/1.4501/Zeron 100;

2205/F60/S32205;

ASTM A182 F44/S31254/254SMO/1.4547;

17-4PH/S17400/1.4542/SUS630/AISI630;

F904L/NO8904/1.4539;

725LN/310MoLN/S31050/1.4466

253MA/S30815/1.4835;

Nickel alloy steel:

Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;

Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;

Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;

Alloy K-500/Monel K-500/NO5500/2.475;

Alloy 600/Inconel 600/NO6600/NS333/2.4816;

Alloy 601/Inconel 601/NO6001/2.4851;

Alloy 625/Inconel 625/NO6625/NS336/2.4856;

Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;

Alloy 800/Incoloy 800/NO8800/1.4876;

Alloy 800H/Incoloy 800H/NO8810/1.4958;

Alloy 800HT/Incoloy 800HT/NO8811/1.4959;

Alloy 825/Incoloy 825/NO8825/2.4858/NS142;

Alloy 925/Incoloy 925/NO9925;

Hastelloy C/Alloy C/NO6003/2.4869/NS333;

Alloy C-276/Hastelloy C-276/N10276/2.4819;

Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;

Alloy C-22/Hastelloy C-22/NO6022/2.4602;

Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;

Alloy B/Hastelloy B/NS321/N10001;

Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;

Alloy B-3/Hastelloy B-3/N10675/2.4600;

Alloy X/Hastelloy X/NO6002/2.4665;

Alloy G-30/Hastelloy G-30/NO6030/2.4603;

Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;

Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;

Alloy 31/NO8031/1.4562;

Alloy 901/NO9901/1.4898;

Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;

Inconel 783/UNS R30783;

NAS 254NM/NO8367;

Monel 30C

Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952

Nimonic 263/NO7263

Nimonic 90/UNS NO7090;

Incoloy 907/GH907;

Nitronic 60/Alloy 218/UNS S21800


SALES@GHSAILINGPIPE.COM



A threaded pipe is a pipe with a thread. They are often used in water gas pipes, small diameter water pipes, compressed air pipes and low pressure steam pipes. The pipe is connected to the pipe end with the thread. The thread can be coated with suitable adhesive (such as thick white paint, lead oxide glycerin adhesive, etc.) to ensure sealing.

There are mainly internal teeth, external teeth, live tube, elbow (elbow), three way pipe, four way pipe (crosshead) and reducer.Manufacturing standards:

GB/T 14383, ASME B16.11, BS 3799, MSS SP 83

Threaded Fittings,Pipe Threaded Fittings,Steel Threaded Fittings,Forged Threaded Fittings

HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com