Wallpapers have many advantages over paint, such as easy adhesion, variety of colors, and easy cleaning. Therefore, it is sought after by more and more people. But many people think that although the wallpaper is good, but their service life is too short, it is better to use paint to make it cost-effective. People who have this kind of idea must not understand the maintenance of the wallpaper. In fact, as long as the wallpaper is well maintained, it can be used for many years.

The wall occupies the largest area in the decoration. Of course, the decoration also costs a lot of money. So how do you use your favorite wallpaper for more than ten or twenty years? I want the home to be bright and new, and the maintenance of the weekdays. And maintenance is indispensable! So how to maintain the wallpaper? The following small series will tell you about the maintenance of wallpaper, mainly the following:

First, install the wallpaper for 3-4 days, use a slightly damp flat towel or sponge to gently wipe off the residual glue left in the wallpaper seam.

Second, in the room where the wallpaper has just been laid, the doors and windows should be closed tightly. It is strictly forbidden to blow the wind and blow, and the wallpaper must be in a dry state. If you don't do this, the wallpaper you just posted may have a raised edge or a drum.

Third, the wallpaper is relatively delicate, can be wiped but not resistant to knocking. If it is found to have slight or small damage, it can be covered with paint or paint of similar color.

Fourth, flat printing (non-concave) type of wallpaper, when cleaning on weekdays, you can use a feather duster to wipe off the surface dust. For the embossed wallpaper, every 3 to 6 months, the surface dust can be wiped off with a vacuum cleaner or a soft brush.

Fifth, the installed wallpaper, after two or three years should pay attention to the seams and turning points, found that there is cracked edge, should be repaired immediately, can extend the use of wallpaper.

Brass CNC Milling Parts

Brass Cnc Milling Parts,Aluminum Cnc Machining Parts,Anodized Aluminum Rings,Custom Cnc Machining Parts

JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.tongdetrades.com