Downhole RF card attendance machine use precautions

1. Please go to the management department to file, collect and install the RF card before use.

2. When going down the well, please take the prescribed downwelling attendance channel. When going to the well, please take the prescribed upper attendance channel.

3. When using, please pass the attendance area in order, to avoid confusion, misunderstanding and mutual interference caused by multiple people passing through the attendance area.

4. Please pause a little while passing the attendance equipment. Try to place the lamp holder with the card close to the attendance machine, but do not touch the attendance machine.

5. When the buzzer on the mounting frame sounds “beep” and the yellow light is on, the attendance is successful and leave the attendance area forward. When attending the attendance, you can also confirm the attendance success by observing the traffic light on the black attendance machine. The attendance is successful when the green light is on.

6. If the buzzer sounds long, the yellow light does not light, or the traffic light on the attendance machine does not respond, please exit the attendance area and re-enter or shake the lamp head in front of the attendance machine. If it is still unsuccessful after repeated three times, please contact the administrator in time to make any mistakes on the attendance machine.

7. Please do not touch the attendance machine with the lamp cap or lamp cap.

8. Please do not carry metal objects through the attendance area to avoid interference.

9, please do not maliciously destroy the attendance equipment.

Spot Light

1. Attractive small-sized high power LED spot light, suitable for architectural, landscape and accent lighting applications.
2. Cree or Lumileds LED in RGB or mono color and various beam angles.
3. Available in several LED configurations with various power outputs range to meet various projection requirements.
4. High brightness contrast level for consistent and smooth color change effects.
5. Precision die cast aluminum, clear tempered glass diffuser and optional anti-glare hood.
6. Tilt and planar rotation adjustable mounting base for easy and fast installation and beam projection setup.
7. AC110V~220V or DC24V input voltage with integrated driver. Ingress protection at IP66.

Spot Light,LED Spot Light,Anti Surge LED Spot Lights,High Power Spot Light,RGB Spot Light,IP66 Spot Light

StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com