Floor tiles: There are four types of floor tiles commonly found on the market: 600mm×500mm, 400mm×400mm, and 300mm×300mm.

Recommendation: When the floor tiles are accurately accounted for, considering the cut-off losses, an additional 3% to 5% of the losses will be required for purchase.

Brick, wall, stone rough calculation method

◆ The floor space of the room &spanide; each floor tile area × (1+10%) = the number of bricks (in the formula, 10% means increased loss).

Precise calculation methods for floor tiles, wall tiles, and stone

◆ (Room length & spanide; Brick length) × (Room width & spanide; Brick width) = Number of bricks

Examples

5mm long, 4mm wide room, using 400mm × 400mm specification tile calculation method

â—†5m&spanide; 0.4mm=12.5 blocks (take 13 blocks)

â—† 4m&spanide; 0.4mm=10 blocks

◆ 13×10 blocks = 130 bricks total

Wall tiles: There are many varieties of wall tiles. When accounting, you should first find out the position of the surface of various specifications of the magnetic discs from the construction drawings, and then calculate the area of ​​the magnetic discs at each position, and then place them everywhere. The total area of ​​various magnetic pieces can be obtained by adding together the sizes of the magnetic pieces, and finally add 3% of the loss.

Stone: Ground stone - The consumption of ground stone is roughly the same as that of tile, except that the ground mortar layer is slightly thicker. Considering the cut-off loss at the time of budget usage, the handling loss is greater than that of the tile, and the loss should be about 1.2%. .

Wall stone - When calculating the wall stone, it should be calculated separately and calculate the total area according to various specifications. For the complex wall surface and modeling wall surface, the total area of ​​each specification should be calculated according to the unfolded area. After that, the number of plates of various specifications can be obtained by dividing them by the size of the specification, and finally, the loss amount of about 1.2% is added.

Wallpaper: When calculating the amount of wallpaper, the height of the skirting board and the top line must be subtracted. In addition, the door and window area of ​​the room should be subtracted from the number of used components. The larger the pattern of the wallpaper collage, the greater the loss, so it is about 10% more than the actual usage.

Home improvement size data tile plate room window

Hammer Series

According to different hammer head shapes, hammers can be divided into ball pein hammers, sledge hammers, etc. According to different hammer head materials, they can be divided into carbon steel hammers, wood hammers rubber hammers, plastic hammers.

The specifications of the hammer are generally expressed by its mass, and commonly used are 0.25kg, 0.5kg and lkg.

American Type Hammer,Heavy Duty Hammer,Claw Hammer,Sledge Hammer

Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaous.com