>>> Decoration Must See: The Right Steps to Paving Tiles

Floor tiles occupy an important position in home decoration. It is not only the bathroom, the kitchen, and the balcony floor but also the foyer, the dining room, and the living room that often require floor tiles for decoration. Therefore, the quality of the tiles and the quality of the tiles will directly affect the housing quality, overall appearance and function.
So what should be paid attention to in the inspection of the quality of the floor tiles?

A look: There are many varieties of floor tiles. According to the variety and technology, it can be divided into glazed tiles, non-slip tiles, vitrified tiles, polished tiles, micro-powder tiles, and seepage tiles. There are also many quality levels: sub-optimal, qualified products, and other external products. The quality of the tiles and the quality of the tiles are often observed through careful observation. The surface of the tiles is cracked, uneven corners, and the surface of the tile is bright. However, there are spots or glaze in the glaze layer or in the glaze layer. There is a color difference in the surface color, and generally it can be judged that the quality of the floor tile itself is poor, and it belongs to the inferior product that must be replaced. In addition, the decoration quality of the floor tiles mainly depends on whether the flatness of the entire surface is greater than 2 mm within a range of 2 meters, and whether the seam between the bricks and the bricks is greater than 0.5 mm, and whether the seam straightness exceeds 3 in a length of 5 meters. Millimeters, all those that exceed the above range belong to unsatisfactory quality of decoration.

Second knock: check the floor tiles with or without hollowing test method is usually used small steel hammer or small hammer, small iron bar, lightly hit the room around the corners of the floor tiles and the middle, to detect the floor tiles with no empty drum sound. The sound is crisp, and it is normal. If there is a hollow sound, it means that the quality of the inlay decoration is ineligible and must be promptly eradicated and replaced. During the inspection, marking the empty drum bricks revealed that the bricks were broken and the edges of the tiles were also replaced by signs. Tong Tai, a home inspection division, told reporters that some decoration companies often mislead consumers with "a small amount of empty drums within the allowable range of quality." This is in fact contrary to regulations. Remind owners to pay attention to rights protection.

Three splash: may wish to splash the water test floor tiles posted on the balcony, bathroom, kitchen, there is a drainage slope requirements. Check whether there are potholes on the floor of the bathroom, kitchen, and balcony, and whether the water is flowing smoothly or not, splashing a lot of water will know. This “process” can be put to the end. After all the other items have been tested, put the water on the water and spill it on the floor. Wait for a moment. The accumulation of water indicates where the floor tiles are uneven or go down the slope. Did not do enough.

Floor Acceptance Tile Paving Tile Room Decoration Home Decoration Company Decoration Living Room Whole Bathroom Bathroom Door Bathroom Floor Tile

Insert Nut

Brass knurled thread insert Made of brass material, good thermal conductivity and heat resistance.

Widely Used On the Injection molding for Tightly Fixing.

Brass knurled Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection.

We are manufacturer of Insert Nut in China, if you want to buy Embedment Insert Nut,Brass Threaded Knurled Insert,Insert Thread Nuts please contact us.

knurled insert nut,threaded insert nut,wood insert nut,brass insert nut,furniture insert nut

Shenzhen Lanejoy Technology Co.,LTD , https://www.szstainlesssteelwiremesh.com