Wheat can be increased by soaking seeds with micro-fertilizer

Sun-breeding and sun-dried selection, spread the seeds in the sun (be careful not to spread the seeds on the concrete floor), and often flip, so that the seeds absorb heat evenly, improve the air permeability of the seed coat, enhance the seed vigor, and improve the seed germination rate. . Continuous drying for 2 to 3 days.

According to the experiment of soaking seeds, wheat is treated with micro-fertilizer for seed treatment, which can increase production by more than 10% per 667 square meters, and increase the yield of a few plots by 20% to 30%. However, the amount of micro-fertilizer is very small. How to carry out seed treatment?

1. Zinc fertilizer: 3 to 5 grams of zinc sulfate per kilogram of seed, the concentration of soaking solution is 0.02% to 0.05%, soaking seeds for 12 hours, and drying can be sown.

2. Boron fertilizer: When soaking seeds, soak seeds with 0.01%~0.05% borax or boric acid solution for 6~12 hours; increase the solution concentration during seed dressing.

Third, molybdenum fertilizer: 2 to 6 grams of ammonium molybdate per kilogram of seed, first dissolve ammonium molybdate with a small amount of warm water, then dilute to the extent of submerged seeds, stir together with the seeds in a tank or bucket, remove in the Dry and soak in a cool place; the concentration of soaking seeds is 0.05% to 0.1%, soak the seeds for 12 hours according to the ratio of seeds to fertilizer solution, and remove the seeds for drying.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

metal coating serice

metal coating serice,High Quality metal coating serice,metal coating serice Details, CN

Shenzhen Heng Yi Jia Technology Co., Ltd. , https://www.spraycoatingline.com