Basic knowledge of ABS plastics
The present invention provides a multifunctional pull faucet, comprising: a faucet body, a drawing part is provided at the water outlet port thereof, and the drawing part is connected to a main channel, wherein at least three are provided in the faucet body A branch channel, and the three branch channels are all connected to the main channel. A multifunctional pull faucet provided by the present invention, wherein the hot water channel, the cold water channel and the water purification channel (pure water channel) are all connected to the main channel , And the main channel is connected with the drawing part on the main body of the faucet, so that the drawing part can obtain the water quality (hot water, cold water, purified water or pure water) required by different users, thereby improving the user experience, and , By integrating the hot water channel, cold water channel and pure water channel (pure water channel) into the main channel, the internal structure of the faucet is simplified, and the production cost of the faucet is reduced. Pull Out Faucets,Pull Out Kitchen Tap,Pull Out Sink Faucet,Standard Pull Out Faucet Yuyao Zelin Sanitary Ware Co., Ltd , https://www.kitchen-sinkfaucet.com
Specific gravity: 1.05 g/cm3 Molding shrinkage: 0.4-0.7%
Molding temperature: 200-240°C Drying conditions: 80-90°C 2 hours Features:
1ã€Comprehensive performance, high impact strength, chemical stability, good electrical properties.
2, and 372 plexiglass good welding, made of two-color plastic parts, and the surface chrome, spray paint processing.
3, high impact, high heat resistance, flame retardant, enhanced, transparent and other levels.
4, liquidity is slightly worse than HIPS, better than PMMA, PC, etc., good flexibility.
Uses: Suitable for the production of general mechanical parts, wear-resistant wear-resistant parts, transmission parts and telecommunications components.
Molding characteristics:
1. Amorphous materials, medium flow, large moisture absorption, must be fully dry, the surface of the plastic parts required to be shiny and preheated dry 80-90 degrees for 3 hours.
2. It is advisable to take high material temperature and high mold temperature, but the material temperature is too high and it is easy to decompose (decomposition temperature is >270 degrees). For higher precision plastic parts, the mold temperature should be 50-60 degrees for high gloss. Resistant to thermoplastics, mold temperature should take 60-80 degrees.
3, if you need to solve the water mark, you need to improve the fluidity of the material, take a high material temperature, high mold temperature, or change the water level and other methods.
4, such as the formation of heat-resistant grade or flame-retardant material, 3-7 days after the mold surface will remain plastic decomposition products, resulting in shiny mold surface, the need to clean the mold in time, while the mold surface needs to increase the exhaust position.