Full-Range Wireless GPS Signal GPS Bug Signal Multi-Detector High Sensitivity Versatile Detector for Security Anti-Spy Device Wholesales Cheap
October 20 11:06:52, 2021
Model NO.: VS-GV
HS Code: 9031809090
Model NO.: VS-GV
HS Code: 9031809090
This device is a VERSATILE RF signal detector which can detect most of GSM phone, smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.  It applies with fuzzy scanning technology to detect peeping cameras,bug,cellphones and other radio frequency devices.This device surely avoids being peeped or tapped to protect privacy or protect information being disclosed secretly.  This device has a new digital amplifer to heighten the indication for the digital signals of Bluetooth,WLAN, WiFi, cellphone and digital Spread Spectrum wireless products,etc.  This device has 3 LEDs indicating the detected signal strength.When detecting cellular phone or peeping camera, the LED will light from Level 1 to Level 2 to Level 3,and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.  * Wired camera detection 1.There is a Wire detection switch on the upper side, press down the red button, it will active the ultra-bright LEDs for scanning suspected areas.Press the switch again,the red light will put out. 2.When you find a suspected reflection, shake your detection light right-and-left slightly.If the location of the reflection as you shift,it not a camera. 3.If the location of the reflection does not shift,then you might have discovered the lens of a hidden camera.  * Analog/Digital Select  Switch The signal of wireless camera, hidden microphone and walk talki areanalog signal. The signal of Bluetooth, WLAN, Wi-Fi, cellphone and digital spread spectrum products aredigital signal.
Usually, set theA-D switch to A. When to detect analog signals,the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of detector will be blinking and the buzzer will go off dis-continuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth,WLAN,cellphone and digital spread spectrum wireless products,etc.  * SILENT DETECTION Earphone output: User can detect by earphone hearing without others' awareness.  * SENSITIVITY TUNER 1. Eliminate the environment interference to set the detection threshold. 2. Adjust to shorten detecting distance for locating and finding signal source.  * DISCOVER GSM / 3G BUG & SPY CAMERA This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.  * STANDBY / IDLE PHONE REGISTRATION DETECTION  Specifications:
size
L87*W55*H24 mm
weight
 105g
Detecting range
50 MHz ~ 6.0 GHz
Power
3V DC (AAA / UM-4 battery x 2)
Warning mode
1.Audible alarm and 3 LEDs 2.Vibration and 3 LEDs 3.Silent, 3 LEDs and earphone output
Detecting distance 1
Audible alarm and 3 LEDs Vibration and 3 LEDs Silent, 3 LEDs and earphone output
Detecting distance 2
2G Cell phone: 40 feet (set at analog) 2G Cell phone: 50 feet (set at digital) 3G_4G Cell phone: Depending on the strength and type of cellular system
  Features: 1.Set the Wired switch on, it will activate the ultra-bright LEDs for scanning suspected areas. 2.Catching all the Peeping camera and Concealed microphone. 3.Hunting all the Cell phone, Wireless phone. 4.3 LEDs indication: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong). 5.Dual strength indication: Audible / LED alarm. 6.Sensitivity tuner for Distance adjustment. 7.Switchable Sound / Vibration detection. 8.With earphone to detect without other's notice. 9.With analog and digital signal detection switch.
Â
This device is a VERSATILE RF signal detector which can detect most of GSM phone, smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.  It applies with fuzzy scanning technology to detect peeping cameras,bug,cellphones and other radio frequency devices.This device surely avoids being peeped or tapped to protect privacy or protect information being disclosed secretly.  This device has a new digital amplifer to heighten the indication for the digital signals of Bluetooth,WLAN, WiFi, cellphone and digital Spread Spectrum wireless products,etc.  This device has 3 LEDs indicating the detected signal strength.When detecting cellular phone or peeping camera, the LED will light from Level 1 to Level 2 to Level 3,and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.  * Wired camera detection 1.There is a Wire detection switch on the upper side, press down the red button, it will active the ultra-bright LEDs for scanning suspected areas.Press the switch again,the red light will put out. 2.When you find a suspected reflection, shake your detection light right-and-left slightly.If the location of the reflection as you shift,it not a camera. 3.If the location of the reflection does not shift,then you might have discovered the lens of a hidden camera.  * Analog/Digital Select  Switch The signal of wireless camera, hidden microphone and walk talki areanalog signal. The signal of Bluetooth, WLAN, Wi-Fi, cellphone and digital spread spectrum products aredigital signal.
Usually, set theA-D switch to A. When to detect analog signals,the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of detector will be blinking and the buzzer will go off dis-continuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth,WLAN,cellphone and digital spread spectrum wireless products,etc.  * SILENT DETECTION Earphone output: User can detect by earphone hearing without others' awareness.  * SENSITIVITY TUNER 1. Eliminate the environment interference to set the detection threshold. 2. Adjust to shorten detecting distance for locating and finding signal source.  * DISCOVER GSM / 3G BUG & SPY CAMERA This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.  * STANDBY / IDLE PHONE REGISTRATION DETECTION  Specifications:
size
L87*W55*H24 mm
weight
 105g
Detecting range
50 MHz ~ 6.0 GHz
Power
3V DC (AAA / UM-4 battery x 2)
Warning mode
1.Audible alarm and 3 LEDs 2.Vibration and 3 LEDs 3.Silent, 3 LEDs and earphone output
Detecting distance 1
Audible alarm and 3 LEDs Vibration and 3 LEDs Silent, 3 LEDs and earphone output
Detecting distance 2
2G Cell phone: 40 feet (set at analog) 2G Cell phone: 50 feet (set at digital) 3G_4G Cell phone: Depending on the strength and type of cellular system
  Features: 1.Set the Wired switch on, it will activate the ultra-bright LEDs for scanning suspected areas. 2.Catching all the Peeping camera and Concealed microphone. 3.Hunting all the Cell phone, Wireless phone. 4.3 LEDs indication: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong). 5.Dual strength indication: Audible / LED alarm. 6.Sensitivity tuner for Distance adjustment. 7.Switchable Sound / Vibration detection. 8.With earphone to detect without other's notice. 9.With analog and digital signal detection switch.
