Scrubber cleaning to use common sense
Thin Wall Steel Tubing/Thin Wall Steel Tube/Thin Wall Steel Pipe are produced byCold Drawn or Cold Rolling,
with thick wall to below 4.5mm, 5.0mm, 6.0mm, depending on different OD.
Extremely thin wall thickness Seamless Steel Tubes
OD 168 x WT 4.5mm
OD 114 x WT 3.5mm
OD 168 x WT 4.5mm
Steel Grade can be ST37.0, ST37.4, ST44.0, ST45, ST52 or other steel grade
Length: 5000-5800mm, or specified by customer
Thin Wall Steel Tubing Thin Wall Steel Tubing,Seamless Thin Wall Steel Tubing,Thin Wall Steel Square Tubing,Thin Wall Stainless Steel Tubing,Thin Wall Steel Tube,Thin Wall Steel Pipe Torich International Co.,Ltd--The Steel Tube Maker , http://www.chinasteeltubepipe.com
#1,
First of all. Washing powder and detergent foam are very rich. The scrubber uses a suction motor to vacuum the ground to absorb the sewage, but the foam is easily absorbed into the suction motor, and the motor is generally damaged. And the float can't stop the foam, and the foam net can only block a small amount of foam.
#2,
Second, washing powder as a solid detergent is difficult to completely dissolve in water, and it will accumulate in the clean water tank. These sediments will enter the drain pipe through the filter, causing the solenoid valve to clog or leak.
Big Diameter, thin wall thickness seamless steel tubes
OD 114 x WT 3.5mm
OD 132 x WT 3.8mm
OD 132 x WT 4.8mm
OD 139 x WT 5.8mm
OD 132 x WT 3.8mm
OD 132 x WT 4.8mm
OD 139 x WT 5.8mm