For a half-packaged owner, the floor is an important part of the main material purchase, and it is also a heavy burden for home improvement. If you want to save money on decoration, this one can not be ignored, Xiao Bian summed up the practical knowledge of floor purchase for you, Let you become an expert in less than 5 minutes, saving thousands of dollars is not a problem.

Acer real wood flooring     Guangri Flooring  

A, solid wood flooring

Solid wood flooring is made of natural materials - wood, made of mechanical equipment. The characteristics of the floor is to maintain the natural material - the performance of the wood.

1. Tree species

There are many kinds of trees available for solid wood flooring. There are precious rosewood and teak; in general, there are eucalyptus wood, eucalyptus wood, manchurian ash, and Gan croton bean; inexpensive pine and pine wood are available, and the price difference is very large. Choose the color board as much as possible during the purchase, do not choose the dyeing board, try to select the stable tree species, to avoid the phenomenon of scooping, twisting, bending, cracking, arching and ringing during the long-term use of the wooden floor.

2, size

The solid wood floors currently available on the market are all long and wide in size, such as 900mm x 90mm x 18mm. In fact, wooden floors should not be short and should be narrow and not wide. Floors smaller than 600mm x 75mm x 18mm should be used. Small, stronger resistance to deformation. If used for floor heating floor, it should not be thick, it is generally 8~12mm thick.

3, moisture content

The moisture content of the wooden floor is very important. The moisture content of the purchased floor must be consistent with the local equilibrium moisture content. Buy the floor must determine the moisture content, if there is no moisture meter, do not buy its board. The method of measuring the equilibrium moisture content is very simple. The moisture content of the purchased varieties is first determined in the exhibition hall, and then the moisture content of the wooden floor of the purchased varieties is checked out. If the water content of the two varieties is only 1% to 2%, it is a qualified product.

4, processing accuracy

With 10 floors assembled on the ground, hand touch, seeing the accuracy of its processing, finish is smooth, smooth, rake, slot fit, installation gaps, anti-deformation tanks and other assembly is tight.

5, substrate quality

Check the level of the floor, whether there are bugs such as insect eyes, cracks, decay, blue changes, dead knots, etc. For small living quarters, color difference can not be too demanding, this is a natural property of wood, as for the natural texture of wood, most of the chord section, a small part of the cut surface, if you want to have the same cut, it is more difficult to achieve in solid wood flooring Unless it is a veneer veneer.

6, paint quality

Whether it is lacquer lacquer, roller lacquer flooring, commonly known as lacquer board; whether it is light or matt lacquer flooring, the paint lacquer board surface should be uniform, fullness, smooth, leak-free paint, bubbling, hole To put forward is the degree of wear, it is recommended to buy UV light-cured coating, the market dealer referred to as UV paint board, its wear resistance, scald and other properties are better than other finishing processes. Burning with a cigarette for 20 seconds does not leave a mark.

Flooring purchase natural floor del floor paint coating home improvement

Flooring Accessories

Changzhou Yingda New Material Co., Ltd , https://www.yingdaspc.com