The deep-well integrated environmental protection stove is the first generation of integrated environmental protection stoves developed. It has some defects in its design, such as difficulty in cleaning, inability to effectively separate soot, low thermal efficiency, easy oil accumulation, limited type of pot use, etc.

1. Inconvenient to use: The diameter and size of the pot are limited, and it is extremely inconvenient to cook the pan and stir-fry the bowl.

2, low thermal efficiency: the flame is too close to the suction port, the smoke machine takes a lot of heat while inhaling, wasting energy. Someone has done experiments: it takes 7 minutes to boil a pot of water when the machine is turned on, and it takes only 4 minutes to boil a pot of water without opening the machine.

3, recessed design is easy to cause a sanitary corner, accumulated in the flat bottom oil pan, around the stove and the shaft of the condiment powder, vegetable scraps, sewage to form dirt is extremely difficult to clean, soot, dirt accumulation for a long time will cause mildew and smell.

4, the front panel size of the panel can not be flush with the cabinet, there is a big gap between the cabinet and the cabinet, the oil is easy to fill.

5, after using for a period of time after booting, the panel will be hot, and even deformed and discolored.

6. There are safety hazards: the flame mouth is too close to the smoke inlet, and the flame is easy to inhale into the inner cavity. When the oil is too much and the temperature is too high, it will cause spontaneous combustion of the fuselage, which has great safety hazards; The internal temperature of the body is too high, and the service life of various electrical appliances will be greatly shortened.

7. Inconvenient maintenance: The whole cabinet must be folded during maintenance, and there are defects in the design.

The side suction integrated environmental protection stove is based on the deep well type integrated environmental protection stove and the near suction type range hood, which is the perfect combination of the two. That is to retain the strengths of both, and to abandon the defects of both, making the design more scientific and more reasonable:

1. The diameter and size of the pot are unlimited and easy to operate.

2, high thermal efficiency, energy saving, in line with national standards.

3, the panel is fully enclosed design, easy to clean, no sanitary corners, easy to clean and clean.

4, the front edge of the panel is flush with the cabinet, the connection is tight, and it will not hide dirt.

5, long-term use, will not make the panel hot, not deformed, discolored.

6. The inlet is at the upper part of the flame, and the distance is appropriate. The smoke chamber is completely separated from the electrical components. It can fully absorb the fumes without causing the internal temperature of the fuselage to be too high and affect the service life of the original electrical components. There is no hidden danger of spontaneous combustion of the fuselage.

7, the motor fan can be removed beforehand, the maintenance is very convenient, only need to remove the eight screws can be easily solved.

FUJI Elevator Outbound Call Box

FUJI Elevator Outbound Call Box,Embedded Elevator Control Box,Touch Screen lift Control Panel,Intelligent Elevator Control System

Suzhou FUJI Precision Elevator Co.,Ltd , https://www.profuji.com