Furniture "low-carbon" road is struggling, furniture people may go from easy to difficult
People are increasingly aware that environmental protection and emission reduction are the only way to achieve sustainable development. The so-called "low carbon" is not a lower carbon emission in a simple sense, but a new development model that covers the three major elements of low energy consumption, low emissions, and low pollution. The essence is from all aspects. We will start to improve the efficiency of resource utilization, seek for rapid recycling of renewable resources, maximize the use of green energy, and reduce the loss of non-renewable resources. The home furnishing industry is a major energy consumer and has become a key target for low-carbon consumption. However, as far as I know, the home furnishing industry can really achieve low-carbon consumption. The author interviewed a furniture company that is famous for producing environmentally friendly products and occupies a large share in the market. However, the relevant person in charge of the company refused to talk about the problem of low-carbon furniture with a real name. "Sometimes, it is really difficult to make low-carbon furniture in China." The person in charge said with emotion: "Because the country currently does not have relevant strict regulations, the upstream of the furniture industry such as adhesives, plates, paints and other markets are flooded. It is a large number of high-carbon and polluted products. To select a few low-carbon raw materials, the cost will undoubtedly be much higher, and even if these low-carbon raw materials can guarantee 100% low-carbon environmental protection, We are not sure. " What makes the person in charge even more angry is that many high-carbon products can also be used to log on to the consumer stage. Moreover, due to the lack of comprehensive authoritative certification by the state, the so-called high-carbon or low-carbon, in many cases, is only the manufacturer's own To tell the truth, "products that are obviously high-carbon can also be packaged very low-carbon, so that we, the manufacturers who were willing to produce low-carbon products, have to take another countermeasure." According to the person in charge, because they are a brand with a relatively large market share and rich product grades, their approach is that the overall brand is relatively low-carbon and environmentally friendly, and mid-to-high-end products often do. This point, but for low-end products, sometimes have to use some high-carbon raw materials. "This is also something that can't be done. The sales of mid- to high-end products are not large. The real profit point of the company is still in the mid- to low-end products with large sales. If we use low-carbon raw materials, our costs are difficult to match. Other manufacturers compete. "Because many consumers care more about the price than whether they are low-carbon, so if they pay more, they will not necessarily buy low-carbon products. The furniture industry "low carbon" may wish to go from easy to difficult Contrary to the person in charge's statement that "low carbon is very difficult", Mr. Ke, the marketing director of E Family Fashion, believes that there are many low-carbon ways of home furnishing. . He believes that the choice of raw materials can be low-carbon, such as furniture products made from bamboo, birch, rattan, grass and other pure natural materials that have been specially treated in the market in recent years because of the short growth cycle of the raw materials and the production process. Reasons such as low pollution can become low-carbon furniture that was popularized earlier. The design of this type of furniture also pursues natural flavor, allowing various raw materials to be displayed in their original form, so it is also loved by those who pursue natural life; in addition, some emerging products have begun to emerge, such as frying on Taobao The flamboyant low-carbon paper furniture that can carry 80 kg is also more popular because of its light weight, second highest recyclability, and novel shape; other such as modified wood-plastic composite materials, biological composite materials, polymer fuels, It is also gradually widely used in furniture. It is understood that some responsible manufacturers have made more breakthroughs and innovations in the mining process, production process and processing technology. Of course, this belongs to the advanced stage of low-carbon home furnishing. For example, there is a very famous furniture brand in Germany, which cuts a tree and replants another tree, so as to maintain the ecological balance to a certain extent, it is equivalent to reducing the loss; some modern red apple furniture The plate is formed by high temperature and high pressure during the backlogging process, and the surface is coated with a special coating, which is not only wear-resistant and scratch-resistant, but also has very good fire resistance and corrosion resistance, which increases the service life of the furniture and also From another angle, it reduces the loss of re-mining and production. Low-carbon economy will be the new competitiveness At present, for the furniture industry in China and even the world, "low carbon" is still in an emerging and to be developed situation. Over a period of time, the problems of high mining, high emissions, and high pollution will still exist. Great efforts to improve. However, as "low carbon" has been recognized by more and more people, relevant experts predict that the world has entered the era of "low carbon" revolution, and it will have a huge impact on the development mode of enterprises and the way of life of the people from all aspects. In the near future, more and more people will inevitably choose to purchase "low-carbon" household products and choose a "low-carbon" lifestyle. Lu Qifeng believes that taking the "low-carbon" home road is an inevitable choice for consumers, and it will be the only way for home furnishing companies to win public recognition and win market opportunities. Therefore, whoever takes this road first is actually It is an opportunity to seize the market. Flat-panel solar energy allows households in bungalows to "low carbon" The use of solar energy is undoubtedly a good idea for low-carbon homes, but the vacuum tube solar water heaters that currently occupy most of the market share on the market, but because of the large area occupying the roof, many occupants of the house are abandoned outside the solar door. The flat-plate solar water heater is a solution for ordinary houses to use solar water heaters. Guangdong Five-Star Solar, one of the ten leading brands in China's solar thermal utilization industry, recently launched the fourth-generation laser blue film high-efficiency flat panel solar. The product is designed according to the highest EU standard in the industry. The core heat absorption rate is up to 97%, infrared emission The rate is only 5%, and the solar light-to-heat conversion ratio is high; the design life is also up to 30 years, which is 2 times longer than that of the third-generation vacuum tube pressure-bearing products. It is reported that each use of such a water heater is equivalent to reducing the exhaust emissions of a car every year. The heat collecting plate per square meter can replace 150 kg of coal-fired, equivalent to 417 kWh; in terms of carbon emission reduction, the annual emission reduction of solar water heaters per square meter is about 320 kg. The characteristic of the cup head square neck Bolt is that the head is made into a semicircular ball, and a section of square neck is made under the head. A section of square hole shall also be made on the connected part connected with this bolt. When the bolt is inserted into the connected part and the nut is screwed on, the bolt will not rotate because of the square neck. Its head is relatively smooth, and it is not easy to hook other objects. Cup Head Square Neck Bolt,Carriage Bolts,Round Head Square Neck Bolts,Cup Head Square Neck Bolts Jiangsu Jiajie Special Screw Co., Ltd , https://www.tzbolts.com
Low carbon difficulty, related to upstream industry
Low carbon is difficult because consumers are not buying
For more furniture information , go to http://news.gojiaju.com/
                                     Welcome to provide news interview clues Advertising / News Hotline Turn 8004