Several common methods for distinguishing bearing quality

Whether the outer packaging is clear: Under normal circumstances, the factory brand has its own special designer to design the outer packaging, and arrange the production conditions of the factory to produce, so the packaging is very clear from the line to the color block, unambiguous .

Whether the steel printing is clear: brand words, labels and so on will be printed on the bearing body. The font is very small, but most of the products produced by the factory use the stencil technology, and the type is pressed before the heat treatment, so the font is small, but the recess is deep and very clear. The fonts of counterfeit products are not only blurred, but because of the rough printing technology, the fonts float on the surface, and some can even be erased by hand.

Is there any noise: hold the inner sleeve of the bearing with your left hand, and turn the outer sleeve with your right hand to make it rotate to hear if it has noise. Since most of the counterfeit products are out of production conditions and completely hand-worked, it is inevitable that impurities such as sand will be incorporated into the bearing body during the production process, so that noise will be generated when rotating. This is the biggest difference between a factory brand that strictly enforces production standards and operates with machines.

Whether there is turbid oil on the surface: this should be paid special attention when purchasing imported bearings. Since the current domestic anti-rust technology is not particularly good at home, it is easy to leave a thick oil trace when the bearing body is rust-proofed, and it is sticky and sticky on the hand, and the bearings imported from abroad are almost invisible. To the traces of anti-rust oil, it is particularly careful that the imported bearings smell a smell, and it is definitely anti-rust oil, just can't see it.

Whether the chamfer is uniform: the so-called chamfer of the bearing, that is, the intersection of the horizontal surface and the vertical surface, the counterfeit bearing is unsatisfactory in the processing of these corners due to the limitation of production technology.

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification

Light Duty

Heavy Duty

Rang of the Door

Single-Leaf

Double-Leaf

Single-Leaf

Double-Leaf

Door leaf max weight

100kg

100kg x 2

200kg

200kg x 2

Mounting Method

Surface mounting or built-in mounting

Open Width

700-2000mm

650-2000mm

750-2000mm

650-2000mm

Power Supply

AC 220v ± 10%, 50-60 Hz

Opening Speed

300-500mm/s (adjustable)

Closing Speed

250-550mm/s (adjustable)

Creep speed

30-100mm/s (adjustable)

Hold-open time

0.5-20s (adjustable)

Airproof Force (Max.)

>70N

Manual Pushing Force

<100N

Electronic Lock Force

>800N

Power consumption

150W

Ambient temperature

-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com