Intelligent salt spray test machine grand listing
Linear Bar Light,Led Digital Bar Light,Laser Led Bar Light,Beam Bar Light Led EV LIGHT Guangzhou Co., Ltd , https://www.evlightprofessional.com
August 01 12:02:02, 2024
Intelligent Salt Water Spray Tester Features: Specifications: (I) the size of the inner box: 900 * 600 * 500 * mm (W * D * H *) I Carton size: 1350 * 885 * 1285 * ) (Iii) Power: 220V single-phase 1.5KW 50HZ Box material: (I) test chassis light gray PVC plate, thickness 5mm, durable temperature at 85 ℃. (Taiwan South Asia brand) edge around the three-dimensional strengthening of the thickness of 8mm, solid structure. Ii laboratory lid seal with transparent acrylic impact plate, thickness 5mm. Double thick inside and outside the edge to prevent distortion due to long-term high temperature distortion. Thickness 12mm. Iii hide one-piece reagent supplement bottle, easy to clean, easy to operate. (Iv) pressure air barrel SUS # 304 stainless steel pressure tank insulation best. ㈤ The test sample holder adopts a flat graduation type, which can be adjusted at any angle. The four sides fall evenly on the fog and are completely consistent with the fog. The test results are accurate and the number of the test samples is large. Technical basis: According to JIS, ASTM, CNS, GB standard operating parameters. Salt spray test; NSS, ACSS. Laboratory: 35 ℃ ± 1 ℃. Pressure air barrel: 47 ℃ ± 1 ℃. (Ii) corrosion test: CASS. Laboratory: 50 ℃ ± 1 ℃. Pressure air barrel: 63 ℃ ± 1 ℃. Air supply system: air pressure 1Kg / cm2 adjusted in two stages. A section of rough adjustment 2Kg / cm2, the use of imported air filters, with drainage features. The second paragraph for the precise adjustment 1Kg / cm2, 1/4 pressure gauge, showing precise and accurate. Spray method: (1) The principle of Bernoull draw saline and then atomized, uniform degree of atomization, no blocking crystallization phenomenon, to ensure continuous testing. ⑵ nozzle made of tempered glass, adjustable spray size and spray angle. Iii spray volume 1 ~ 2ml / h adjustable (ml / 80cm2 / h standard requirements for testing 16 hours average). The measuring tube adopts the embedded installation, the appearance is beautiful and tidy, the operation observation is convenient, and the installation space of the instrument is reduced. Heating system: using direct heating, heating speed to reduce standby time, when the temperature reaches, automatically switch the temperature state, the temperature is accurate, less power consumption. Pure titanium heat pipe, acid and alkali corrosion, long service life. Control system: (i) 6.5-inch LCD touch intelligent control panel, temperature, time, alarm, defogging, spray, keyboard lock and other functions integrated control, with dynamic display. Ii laboratory heating tank with liquid expansion safety temperature controller 0 ~ 120 ℃ (Italy EGO). Using automatic and manual two water systems, automatically or manually replenish the pressure tank, laboratory water level to prevent water damage to ultra-high temperature equipment. Demisting system: remove salt spray inside the chamber during shutdown to prevent corrosive gases from flowing out of the damage laboratory and other precision instruments. Security devices: (i) low water level, automatically cut off the power, safety warning light device dynamic display. ⑵ over-temperature, the power automatically cut off the heater, safety warning light device dynamic display. (Iii) When the reagent (salt) water level is low, the safety warning light device is displayed dynamically. (Iv) leakage protection to prevent personal injury caused by line leakage or short circuit and equipment failure.