For many rushed buyers, they will choose to buy second-hand houses. However, second-hand houses have been living for a long time. Many of the previous projects have been aging and need to be reconstructed. What needs to be noticed in the transformation of that old house ? Today, we will take a look at the introduction of the old house transformation through the following related contents.

Old House Transformation - Main Body Renovation

Main body rectification is the first project of the transformation of old houses. If the original wall structure is reasonable, only the wall surface needs to be re-decorated. However, many old houses are mainly brick-concrete structures, and the outer walls are mainly load-bearing walls. During the rectification process, they cannot be arbitrarily changed. If you need to demolish the wall, you can't make a hole in the load-bearing wall, and it will destroy the stress structure of the wall. It is easy to cause potential safety hazards.

Old house renovation - replace doors and windows

Old houses live longer, door and window products will appear this or that aging problem, if it is steel door and window film easy to fall off, the main body is not resistant to corrosion, such materials, doors and windows need to be replaced again. If the wooden doors and windows, due to the characteristics of the wood easily lead to cracking deformation and other phenomena, if the paint film is intact, you can use decorative panels to trim.

Old house transformation - trim on three sides

In the renovation of old houses, wall floors and smallpox projects are often easily overlooked. When these projects are remodeled, it is advisable to look for the local professional chefs to actually visit them. Look at whether the wall surface and the ceiling area are flat or cracked. If such a situation occurs, repairs should be carried out immediately. Cement mortar can be used to carry out the trimming of the ground layer.

Renovation of old houses - reform of hydropower

The old residence has a long life, and it often causes surface water leakage, which has an impact on daily life. In the process of renovation, waterproofing should be done and the closed water test should be conducted. Hydropower needs to be reconstructed too. The arrangement before the old house is often unreasonable. It is necessary to check whether the circuit is aging or whether the water pipes are rusted. When the circuit is changed, the main line must use a 2.5mm Copper Wire and penetrate the pvc pipe to arrange it. Water pipes are recommended to be replaced with ppr pipes, which are more green and environmentally friendly.

Old house transformation - garbage removal

The transformation of the old housing community, there is no fixed construction waste dump area like the new community, the property staff will be unified to clean up the garbage. In the old house community, the construction waste generated during the renovation needs the decoration user to request the car to clear and clean it. The property management office does not allow construction waste to be stacked on the roadside of the community for a long period of time, which may easily cause inconvenience in traffic and affect the beauty of the community.

With regard to the transformation of old houses , Xiao Bian introduced it here for the time being, hoping to help you. If you want to learn more wallpaper decoration knowledge, you can pay attention to this site information, more exciting content waiting for you.

Old house renovated old house renovation

Stainless Steel Round Rod Bar

Stainless steel round steel belongs to a class of long wood, also belongs to a class of bar, the so-called stainless steel round steel refers to the cross section of uniform circular long wood, generally about four meters long. It can be divided into light circles and black rods. The so-called light circle, refers to the smooth surface, after the quasi-rolling treatment; And the so-called black rod, refers to the surface of the black thick, hot rolled directly.

Stainless steel round steel can be divided into hot rolling, forging and cold drawing according to the production process. Hot rolled stainless steel round steel is 5.5-250 mm in size. Among them :5.5-25 mm small stainless steel round steel mostly to straight strips in bundles supply, commonly used for reinforcing bars, bolts and various mechanical parts; Stainless steel round steel greater than 25 mm, mainly used in the manufacture of machine parts or seamless steel pipe billets.

Stainless steel round steel has broad application prospects, and is widely used in hardware kitchenware, shipbuilding, petrochemical, machinery, medicine, food, power, energy, aerospace, building decoration. Seawater equipment, chemical, dye, paper, oxalic acid, fertilizer and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts.

Stainless Steel Round Rod Bar,Stainless Steel Bar,Stainless Round Bar,Astm Stainless Steel Bar

Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com