[Asia Pump Network News] rotor pump, also known as gel pump, cam pump, clover pump, universal pump, etc., are volume pumps. Now widely used in food and beverages, fruit concentrates, paste products, cosmetics, pharmaceuticals and chemical industry, have a huge impact on people's lives, then in normal days how to maintain and maintain the cam rotor pump, let it play More useful? Xiaobian following the support for your branch. Maintenance and maintenance of cam rotor pump Maintenance and maintenance of cam rotor pump method: First, check the cam rotor pump and pipe joints with loose phenomenon. Rotate the cam rotor pump by hand to see if the cam rotor pump is flexible. Second, observe the oil level should be at the centerline of oil, lubricating oil should be replaced or supplemented. Third, move the motor, try motor steering is correct. Fourth, try to control the cam rotor pump flow and head in the range indicated on the sign to ensure that the cam rotor pump at maximum efficiency point of operation, in order to get the maximum energy-saving effect. Fifth, cam rotor pump during operation, the bearing temperature can not exceed the ambient temperature 35C, the maximum temperature shall not exceed 80C. Sixth, found that the cam rotor pump abnormal sound should immediately stop to check the reasons. Seven, cam rotor pump in the first month of work, after 100 hours to replace the oil, after each 500 hours, oil change time. Eight, often adjust the packing gland to ensure normal drip filling room indoor (as drops of leakage is appropriate). Nine, cam rotor pump used in the winter season, after parking, the pump body to prevent water to prevent cracking. Ten, long-term deactivation of the cam rotor pump, the pump required to open all, dry the water, the rotating parts and joints coated with grease installed, safekeeping. Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: Zeng Fenfen (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)