With the improvement of living standards, the pursuit of quality of life has become a consensus of quality people. The quality shower room is not only a daily necessities, but also an artwork that is the finishing touch in the overall decoration and highlights the owner's taste. The design of the shower room is also increasingly diversified, with fan-shaped, one-shaped, square, diamond-shaped designs. Today Xiao Bian took everyone to take a look at the relevant content of the minimum width and size measurement method of the shower room .

Basic size and minimum size

1. Shower room width:

Basic size: 900mm*900mm Minimum size: 800mm*800mm

At a minimum, it must be ensured that the body can rotate freely without using the glass. Generally suitable for 900mm * 900mm, if the family is relatively fat, you can also make 1000mm * 1000mm, or bathroom space is limited, made of 850mm * 850mm, but it is best not to be less than 800mm * 800mm.

2. Shower height:

Usually the height of the ceiling is 2400mm. Therefore, the height of the shower room is mostly 1800mm~2000mm. It can also be adjusted according to the actual space situation of the height of the family. It also needs to pay attention to the position of the shower. It is too low to splash water outwards easily. Affects breathability.

3. Distance to heating equipment:

In order to facilitate the winter bathing, everyone will install a heater or Yuba to the bathroom. If it is to measure the hanging equipment, it is better not to put the glass in the shower room or near the shower room to prevent dampness. If it is hung on the top, it depends on the size of the bathroom. The heating equipment in the small space is on the middle. It does not have to be placed in the shower area. If the space is relatively large, you can put it in the middle of the shower area. Try not to face the shower, shower glass, otherwise it will not only reach a good heating effect, but also easily cause the product to age or blew.

4. Distance to other sanitary ware:

Bathrooms are often placed compactly. There are often bathtubs, toilets, and bathroom cabinets next to the shower room. There should be a space of about 100 mm. Otherwise, they will affect each other easily and increase the possibility of self-explosion.

Shower room measurement method

1, shower room screen size measurement: Under normal circumstances, the screen wall lock method with wall aluminum and glass clips. The screen shower room with a wall of aluminum material can be reduced by 5mm compared with the actual size after measurement. The screen shower room with a glass clamp can be smaller than the actual size by 2mm after measurement, and must not be enlarged.

Because some building walls may be slightly inclined, the upper, middle, and lower position widths must be measured when measuring, and the minimum size should be the size of the customized product.

2. For the size measurement of semi-arc and long-arc showers, it is only necessary to measure the size of the two sides of the room to the outer size of the stone base.

Under normal circumstances, the screen is locked wall with aluminum and glass clips. The screen shower room with a wall of aluminum material can be reduced by 5mm compared with the actual size after measurement. The screen shower room with a glass clamp can be smaller than the actual size by 2mm after measurement, and must not be enlarged.

Because some building walls may be slightly inclined, the upper, middle, and lower position widths must be measured when measuring, and the minimum size should be the size of the customized product.

3. For the size measurement of semi-arc and long-arc showers, it is only necessary to measure both sides of the room to the outer size of the stone base.

4. If the stone foundation of the house has a groove (relative to the hinged door), please measure the actual size of the groove and indicate the corresponding groove depth.

5. Measurement of housing - The unified measurement for all housings is the outer size of the stone base (in the case of a standard house, the measured size is the outer edge of the pot).

6. Measurement of abnormal conditions - some terrain may be reinforced doors, or tie rods must be lengthened. At this time, the size of the abnormal part should be measured and should be marked; in addition, pay attention to the special circumstances in the bathroom, to determine the correct Open the door direction, open inside and outside, move the door size. In order to ensure that the shower door can be used normally after installation.

Plastic Shower Room Stainless Steel Shower Room Shower Room Floor Drain Shower Room Shower Head Bathtub Change Shower Room

Fiberglass Measuring Tape

Fiberglass Measuring Tape,Fiberglass Tapes Measure,Fiberglass Tape Measure,Plastic Fiberglass Measuring Tape

Shangqiu Hengli Measuring Tools Co.,Ltd , https://www.jjmtools.com