This article explains the specifications of plastic slotted boards. First, the trunking is generally called the trunking slot, the routing slot, and the wiring slot. Square wire trough, plastic trunking, crimping trough, mounting trough. Electrical wiring troughs, etc. Mainly used for internal wiring of electrical equipment (such as power distribution cabinets, distribution boxes, control cabinets, power cabinets, wiring in switch cabinets), the wires laid in the electrical equipment of this product in 1200V and below. Mechanical protection and electrical protection. After using this product, the wiring is convenient, the wiring is neat, beautiful, and the installation is reliable, which is convenient for finding, repairing and changing the line.

Made of PVC material, the wire groove has good bending resistance, the joint surface is smooth, and the 90 degree inside the wiring groove is not easy to break. The oxygen index is greater than 40, in the case of fire, can prevent the spread of fire and extend the time of protection. The operating temperature can be from -25 degrees to a high temperature of 75 degrees. With insulation, anti-arc, and so on, you can use it with confidence.

The specifications of the plastic slot board are as follows: Note that the height is × 20 × 15 20 × 20 20 × 25 20 × 30 25 × 25 30 × 15 30 × 20 30 × 25 30 × 30 30 × 35 30 × 40 30 × 45 30 × 50 35×25 35×30 35×35 40×25 40×30 40×35 40×40 40×45 40×50 40×60 45×25 45×45 50×20 50×25 50×30 50×35 50 ×40 50×45 50×50 50×55 50×60 50×80 50×100 60×25 60×30 60×35 60×40 60×45 60×50 60×55 60×60 60×80 60×100 65×25 65×45 65×65 75×75 80×25 80×35 80×45 80×40 80×50 80×55 80×60 80×80 80×100 100×50 100×100