1. Countertops: Fireproof and waterproof materials should be used to make countertops. If you do cabinets, it is best to use finished products. The height of the countertop should be determined on the basis of the height of the person who cooks at home most often. The height of the operator's desk is usually 80 to 85 centimeters. There should be a 40 to 60 centimeter countertop on each side of the sink for storing unwashed dishes and the washed dishes. If the dining table is not in the kitchen, then There should also be a 40-60 cm long countertop on the side of the stove, which will be used to temporarily put freshly-cooked vegetables. The back of the cabinet should be used as a baffle, that is, the back should be higher than the countertop in order to prevent the water from flowing to the back of the cabinet, causing the base material to swell, causing cracking and falling off.

2. Top: It is best to hang the top for scrubbing. Usually use PVC, aluminum plastic buckle ceiling. Note that anti-aging materials should be used because the kitchen is smoky all day and the decoration materials are aging faster.

3. Ground: It is best to use non-skid ground and the joints should be small to reduce the accumulation of dirt and facilitate cleaning. The kitchen floor should have floor drains to facilitate floor cleaning and drainage.

4. Wall: It is best to tile to the top for easy scrubbing. In some homes, the wall tiles in the kitchen are only affixed to a height of 1.8 meters. This is not enough and needs subsidies.

5. Light: Chinese food is very particular about color, so the light in the kitchen should be sufficient, and the lighting in the evening should be bright enough, and the color of the light should be white, otherwise it will affect the judgment of the color, and the heat of the food is not easy to grasp. At the same time, avoid shadows from lighting and try not to use spotlights.

6. Range Hood: As the Chinese food is fried, fried, cooked, fried, soot is more, so the range hood to select the power. There is a range rack on the market. The range hood can be placed directly on it. It is convenient, and it is made of glass or sheet metal on both sides of the separator. It can prevent oil splashes, and can also form a relatively closed The space makes the range hood exhaust fumes more thoroughly. If necessary, consider installing an exhaust fan to ensure the fumes are removed.

7. Refrigerator: The location of the refrigerator must be designed in advance so that the "work triangle" is designed properly. Be careful not to let the refrigerator close to the sink so as not to splash water.

8. Sockets: There are more and more electrical appliances in the kitchen. It is necessary to design their own reasonable positions in advance and keep the outlets secure. It should be noted that it is best not to share a socket with other appliances. The usual electric appliances in the kitchen include: refrigerators, microwave ovens, food processors, rice cookers, cooker hoods, sterilizers, dishwashers, soya-bean milk makers, etc. The sockets should be installed separately according to their respective power to avoid a wiring board at the same time. Pick up several high-power appliances. In addition, the outlet must be equipped with a leakage protection device.

9. Meals: There should be a cupboard in the kitchen to put the dishes and avoid the tableware from being exposed. The kitchen utensils, pots and pans, bottles, cans and other items are numerous and miscellaneous. If they are exposed, they are oily and difficult to clean. Therefore, the kitchen cabinet should be closed as much as possible; Spoons, spoons, wine glasses, chopsticks, etc., are mixed together, so it is inconvenient to pick and place. Therefore, the food cabinets should be separated more. The drawers are also better divided into partitions of different sizes, and various types of cutlery are stored separately. Convenient and tidy.

10. Gas: There are many pipes in the kitchen, which are usually covered with hanging cupboards for aesthetic reasons. However, it should be noted that the gas pipeline cannot be used as a concealed pipe and must be exposed outside. The gas meter is also strictly prohibited from moving. It is also necessary to consider whether the meter reading is convenient.

Villa design Entrance decoration Range hood Sockets Electrical decoration Design glass Kitchen decoration notice Decoration partition Glass bricks Drawer cupboard Door partition Cabinet Kitchen wall tiles Kitchen door Door partition door Glass table Glass dining table Glass door Kitchen glass Sliding door Kitchen tile

Machine Screw

Non-tapping screws are machine Screw, the pieceworker to be fastened must be tapped with taps in the screw hole in advance to match the screw threads.

The difference between tooth screws and other screws depends on whether they can be used together with nuts. Tooth screws can be used with nuts. And relative to the screws of other teeth, there are self-tapping screws. The nut of this kind of screw has no bow teeth. As for the standard teeth and fine teeth are only different pitch, it is the nut of the machine screw

Hex Machine screw,pan machine screw,flat machine screw,truss machine screw,Hexagon socket screws

Shenzhen Lanejoy Technology Co.,LTD , https://www.szsmallcompressionspring.com