How to install aluminum alloy sliding door?
[China Aluminum Network] Sliding doors can be divided into two push-pull tracks, a single push-pull track, and a folding push-pull that rotates in the direction of the axis. Folding sliding doors occupy less space and must be designed according to the structure of the house, the size of the space, and the function of use. Sliding door installation is more important than the installation of the track, the track is installed almost completed. Next, we will introduce the sliding door installation steps for everyone. Accuracy 0.1g-0.01g Electronic Scales Accuracy 0.1G-0.01G Electronic Scales,Pocket Scale,Scale For Body Weight,Hanging Vegetable Scale Shanghai Liuyuan Trading Co. , Ltd. , https://www.ly-weighing.com
The size of the rail box above the sliding door must be 12 cm high and 9 cm wide. Like the curtain box, rails are installed inside the track box and the sliding door can be hung on the track. When the height of the door is less than 1.95 meters, it feels depressing. Therefore, when doing sliding doors, the height is less than 19512 = 207 cm.
The gold size of a normal door is about 80 cm x 200 cm. Under this structure, the door is relatively stable and also beautiful. Therefore, the ratio of the width and height of the sliding door should be similar to that of the gold.
Be careful with the sliding door (Ming Hang Track Box) that comes to the top. Because the swing amplitude is too large during pushing and pulling, the sliding door can be easily deformed after a long time, and the door cannot be opened after the deformation, which means that it cannot be repaired and cannot be used.
When installing the sliding door track, fix the upper track, use the gravity cone (hanger hammer) to hang three points on both ends of the upper track and the midpoint. Draw 3.3 points on the floor with an oil pen, install the upper track, and then the upper track Put a hammer to the center of the center and put vertical lines at both ends of the track. The lower track is fixed at these three points to ensure that the upper and lower tracks are completely parallel and the sliding door is pushed and pulled in a better condition.