The family bathroom is a unique and peaceful haven. However, how to keep the bathroom clean and hygienic is a headache. In fact, this is not due to the mastery of descaling skills, master the following tricks, you can easily get rid of the smudges in the bathroom.

Toilet: Don't underestimate the remaining soap head, its role can not be ignored. You can use a piece of gauze or old stockings to make a small pocket and put the soap head into the water tank that is hung in the toilet. Soap is dissolved in the water to clean the toilet. As for the outer base of the toilet that is easy to be overlooked by ordinary people, use a detergent spray to wash it again, and rinse it with water. Finally, wipe it off with a clean cloth to make it white.

Tile: After showering, adjust the nozzle to the cold water level and spray it to the surrounding wall to remove the watermark condensed on the tile. Several rows of tiles near the ground are more difficult to clean, and it is prone to yellow-water alkaline stains, which are difficult to remove even with brushes. At this time, the toilet bowl for cleaning the toilet can be put into the watering can and sprayed onto the tile from top to bottom. After 10 minutes, it can be cleaned with a brush.

Mirror: Because the mirror in the bathroom is in a humid environment for a long time, it will cause water fog to obscure the vision. It is difficult to clean with dry and wet towels. You can first apply a layer of soap on the mirror, then dry it with a dry rag, and the mirror will return to clarity. This method also applies to glass countertops, brackets and basins in the bathroom.

The corner of the mold: If you don't want to see the spotted black and black mold in the bathroom, the best way is to spray the bathroom with diluted alcohol every week. This way, you can easily prevent mildew. If you find that the corners of the bathroom have grown mold, you can also use a cotton ball to wipe the right amount of alcohol.

Clogged sprinklers: When the shower head is used for a long time, the water will not flow smoothly, usually because of the accumulation of scale. The spray head can be removed, soaked in vinegar for two hours, and after removal, the softened scale can be brushed off with a toothbrush.

Faucet: The hard water deposit of the faucet that can be removed by wiping with a lemon slice.

Waterproofing Accessories

TPO Membrane Weld Plates are available for use with TPO membranes. Suitable for rigid substrates such as gypsum board, cement board, etc., then induction welded with thin films to form non-vertical connections to resist wind loads. Plate diameter: 80mm;Hole diameter: 6.8mm. Color: Front side: Light green;Back side: Epoxy light brown/light grey/Or anti-finger print alu-zinc film. FM approved.

Galvanized Steel Roofing Screws are specially designed to be : used for the attachment of TPO thermoplastic membranes to approved substrates. Screws and plates will be used with TPO heavy duty or general purpose fasteners for 22 gauge steel, wood, or structural concrete decks. They can also be used with SRD Roof Fasteners to attach membranes to structural steel purlins. Material:Hardened Carbon Steel. Thread Diameter: 6.3mm. The regular length can be 32mm-280mm (1 1/4"-11") or customized. FM approved.

Waterproofing Accessories,Waterproofing Materials,Roof Waterproofing,Waterproofing plate,Waterproofing Screw

Suzhou Smart Building New Materials Co., Ltd. , https://www.srdwaterproofing.com