Wooden floor renovation process Wooden floor renovation considerations
In the renovation, many heads of household prefer wood flooring. But the refurbishment of wood floors is very troublesome, and many household owners do not understand the renovation, resulting in the layout of the entire floor are affected. In this small series, we recommend that you understand the process of renovation of the underwood floor. So what needs to be paid attention to in the renovation process of wooden floors ? First, the wooden floor renovation process 1, polished wooden floor In general, when we renovate wood floors, we need to sand the wood floor to the surface one to two millimeters in advance. The sandpapers of forty, eighty, and one hundred and twenty meshes were used to sand three times in sequence. The larger the mesh, the smaller the sandpaper particles and the less noticeable the scratches left by grinding. 2, scraping putty As we all know, after polishing the floor, it is necessary to scrape a layer of putty to level the floor, use a special transparent primer putty that is the same color as the floor paint, and scrape it on the polished floor until it is dry. 3, brush primer, color processing The refurbished floor is not beautiful, it depends on the completion of this work. After the scraping of the putty, the primer or color treatment of the floor may be performed. Because the texture of the wooden floor surface is natural, there is no way to change the color, only the depth of the floor color can be adjusted. 4, brush finish Brush topcoat can not only make the floor more beautiful, but also can play a certain role in the protection of the floor. The brush top coat must wait for the paint to dry before it can be carried out. After drying again, it will be sanded with water sandpaper and the floor surface will be grinded. To a little rough, remove dust, brush the second layer of paint. 5, wax polishing maintenance Whether this work is completed or not can directly affect the length of the floor afterwards. This work is a maintenance job. After the finish is dry, a professional waxing machine can be used to polish the floor with wax. Second, wood floor renovation precautions 1, usually the surface thickness of about four millimeters of the product is most of the general solid wood flooring and solid wood composite flooring, it is usually suitable for renovation. 2. Generally speaking, the thickness of the surface layer of the multi-layer solid wood floor is different. The thickness of the thin skin is about 0.6 to 1 mm. The surface thickness like this cannot be refurbished, and the thick skin can be refurbished. The above is all about the wood floor renovation process and the wood floor renovation precautions. I hope to help everyone. If you want to know more relevant knowledge, you can continue to pay attention to the relevant information of this website. Xiao Bian will bring more exciting content for everyone.
Product Introduction
Nonionic polyacrylamide PAM Flocculant is a type of Water Treatment Chemical with soluble high molecular weight polymer or polyelectrolyte. It is white powder or granule with the solid content ≥90% and molecular weight of 2-22 million. It is non-toxic, and can be dissolved in the water easily but not the organic solvents. PAM Polyacrylamide Flocculant, DBNPA 2,2 Dibromo 3 Nitrilopropionamide , TTA Tolyltriazole , Polyaluminum Chloride PAC and Isothiazolinones Bactericide are all Water Treatment Material .
Product Advantage
2).Without alkali and other additives, PH broad in scope, ease of use; for low-temperature, low turbidity, low alkalinity of the raw water is also good flocculation.
Type
Anionic PAM
Cationic PAM
Non-ionic PAM
Appearance
White powder
White powder
White powder
Solid content ,%
≥90
≥90
≥90
Molecular Weight
8-20 million
8-12 million
12 million
Ionic degree,%
80
40-80
≥3
Insoluble,%
≤0.1
≤0.1
≤0.1
Dissolving time(min)
≤60
≤60
≤60
Package
In 25KGS plastic bag or made to order.
Water Treatment Chemical Polyacrylamide,Pam Polyacrylamide Flocculant,Polyacrylamide Flocculant,Water Treatment Flocculant Pam Zhengzhou Chorus Lubricant Additive Co.,Ltd. , https://www.cn-lubricantadditive.com
1). Flocculation ability, high adsorption activity, floc formation and deposition quickly.
3).Easy to use and high effective.
Specification
1) Molecular weight: 12 million.
2) Solid content: ≥90.
3) Residual monomer: 0.05-0.1%.
4) Dissolution time: ≤50min.
5) Appearance: White powder/granule.