Bathroom floor waterproof material how to choose bathroom floor waterproof construction method
Bathroom waterproof bathroom waterproof material bathroom waterproof how to do toilet waterproof practice Biaxial Geogrid,Pp Biaxial Geogrid,Reinforcement Biaxial Geogrid,Plastic Biaxial Geogrid HEBEI TUOHUA METAL PRODUCTS CO.,LTD , https://www.penetting.com
The new building or second-hand house repaving floor tiles should be waterproof on the ground, replace the original floor tiles of the bathroom, and after the original floor tiles are cut off, the ground must be leveled with cement mortar first, and then the waterproof treatment should be done so that the thickness of the waterproof coating can be avoided. Inhomogeneities cause leakage. Before doing waterproofing, be sure to clean the floor and apply 2 to 3 times repeatedly with a polyurethane waterproof coating. 
Put the cement mortar prepared according to the 1:3 component into the floor of the bathroom, and spread the cement mortar in the order of the height of the door and the low water of the outlet. After the pedestal is processed in the bathroom, On the ground water waterproof coating treatment, and finally paved bathroom floor tiles. Cement mortar waterproofing is a traditional process used for home decoration. It has the characteristics of low cost, wide use, and stable performance. 
Excellent: low cost, stable performance;
Bad: Use ordinary cement mortar for waterproofing, which will easily cause certain pressure on high-rise residential buildings.
New material ceramic waterproof
Ceramic granules, also known as clay ceramsite, are artificial granules of a ceramic texture, with high strength, good fire resistance and weather resistance. At present, it should be widely used in high-rise buildings to reduce the pressure on high-rise buildings due to renovations. 
The ceramsite grains are uniform, the strength is high, the surface is microporous, the internal network is criss-cross, and it is not easy to be compacted, and has strong adsorption effect and long service life. Light weight, heat preservation, sound absorption, non-toxic, sterile, non-radioactive, good heat insulation effect.
The seams between the wall and the ground, and the upper and lower water pipes and the ground joints, are the most prone to leakage, and must be handled well. The waterproof coating should be applied in place. The construction personnel are required to provide cement sewers for the upper and lower water pipes of the toilet, and then the floor is redone, and the original waterproof layer is added to form a composite waterproof layer to enhance the waterproofness.