Several ways to save sandblasting abrasive
When selling the blasting machine in the early stage, the user often asks how much the abrasive loss of the equipment is, and how much the abrasive cost is used every day. Abrasives in the sand blasting machine belong to the consumables sales of sand blasting machine in the early stage, often encountered users will ask, how much abrasive loss of the equipment, the cost of abrasives per day and so on. Abrasives are a consumable item in the sand blasting machine, and the cost is also a considerable cost. Just like the oil in the car, how the sand blasting machine saves the abrasive. The blasting machine saves abrasives in six aspects, including separators, dust collectors, abrasive recovery devices, spray guns, sand pipes, and pressure.
Fan Finger Guard, also is known as Fan Guard.
Fan Finger Guard can protect the AC/Dc Cooling Fan, ensure the air flows freely wile keeping objects safely away from the fan blades, and durable, all-metal construction for long term reliability and safety. Extended service life. Reduce the failure rate.
There are many ways to differentiate the fan finger guards.
1. According to the material, the fan finger guards can be divided into metal finger guards and plastic finger guards.
2. According to the size dimension, the fan finger guards can be divided into finger guard for 30 mm fan, 35 mm fan, 40 mm fan, 45 mm fan, 50 mm fan, 60 mm fan, 70 mm fan, 80 mm fan, 92 mm fan, 120 mm fan, 135 mm fan, 150 mm fan, 172 mm fan, 180 mm fan, 200 mm fan, 220 mm fan, 254 mm fan.
Splitter
Separator is the most important part of saving abrasive. There are two kinds of separators, one is pneumatic sorting and the other is mechanical sorting. The general sandblasting machine is pneumatic sorting. Before purchasing the blasting machine, the user can accurately inform the manufacturer of the type and particle size of the abrasive before the process is determined, so that the design of the blasting machine can be more precisely controlled. The closed air valve at the lower part of the separator is adjusted once in position before use.
dust collector
The air volume of the dust collector directly leads to the loss of the abrasive. Before the sand blasting machine is used, the dust damper is adjusted to the optimal position to lock. Clean the filter cartridge inside the dust collector on time, and then pour the waste sand inside the dust collector bell. Fireproof package price http://
Abrasive recovery device
There are two kinds of abrasive recovery devices, one for pneumatic recovery and one for mechanical recovery. If the blasting machine abrasive uses non-metal, it is recommended to use pneumatic recovery. If the abrasive uses metal abrasive, it can be used in both cases. Because non-metallic uses mechanical recycling, the abrasive is easily scraped by the spiral, causing waste. Class clothing manufacturer
Http://
spray gun
The wear of the spray gun will directly bring about the loss of the abrasive. When using the sandblasting machine, it is necessary to check the nozzle, sand nozzle, gas nozzle and gun body of the spray gun in time, and replace it once it is found to be worn. Avoid abrasive loss and waste. Stainless steel "target=_blank> stainless steel bearing manufacturer http://
Sand tube
The loss of abrasive material on the abrasive tube is not very recognized or neglected by the professionals. In fact, the sand tube still has a certain effect in the abrasive loss. The direction of the sand tube completely leads to the direction of the abrasive jet, and the degree of bending of the sand tube will also affect. The direction of the abrasive jet, so each sanding machine of the sand blasting machine minimizes the tendency of the bend.
pressure
The size of the pressure directly leads to the speed of the efficiency, and also directly leads to the loss of the abrasive. If at the best pressure, the fastest efficiency and the smallest loss of the abrasive are made. To know the precise data, this depends on the user's product. The requirements and materials, such as aluminum material, pre-oxidation treatment, the best pressure is about 4 kg.
Wuxi Guitai Coating Equipment Co., Ltd. http://Production and processing of various types of sandblasting machines, sandblasting tanks and sandblasting machine accessories. Guitai Coating has a variety of mechanical processing equipment, as well as high-quality management personnel and operational technicians. Sandblasting machines are mainly divided into two categories: high pressure and general pressure. Including box type, drum type, mobile type, open type, rotary type, automatic series and sand blasting room, no matter what kind of workpiece, up to hull, steel structure, container, small to case, button, injection needle, etc. , can provide complete surface treatment services, also has a large abrasive warehouse, stock of various types of glass beads, glass sand, alumina sand, silicon carbide, plastic sand, stainless steel "target=_blank> stainless steel shots, steel sand, Steel balls, black silicon carbide, green silicon carbide and other abrasives.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Fan Finger Guard
Fan Guard, Axial Fan Guard, Cooling Fan Guard, AC Fan Guard, DC Fan Guard, Metal Guard, Plastic Guard, Metal Finger Guard, Plastic Finger Guard
Shenzhen Fusheng Motor Co.,Ltd , http://www.fushengfan.com