Quantity room matters needing attention

When entering the door-to-door housing after communicative with customers, pay attention to the following contents: → Related links: Designer's summary of construction experience

1, before the preparation of the amount of room: bring the amount of room tools (measure tape, digital cameras, room paper, pens, drawing boards, company information)

2. Record the address and floor of the new house. Pay attention to the orientation of the room and the external environment.

3. After entering the new house, communicate with the customer on site and draw a room map while communicating.

4. When drawing the plan, specify: (1) position of beam column (2) position of windows and doors (3) upper and lower water pipelines (4) air-conditioning position (5) position of main box (6) size of room

5, the amount of room to do serious, meticulous, upper and lower water pipes, heating, bathroom and kitchen facilities, the exact location of the room-shaped structure.

The quantity room is the first step in house decoration. Although this link is small, it is very necessary and important. → Related Links: Is it Necessary for Home Improvement?

Simply put, the quantity room is the customer to take the designer to the new house to carry out on-site measurement, measure the length, width and height of each room in the house and the positions of the doors, windows, air conditioners and heating one by one. The quantity room first quotes the decoration. It will have a direct effect. At the same time, the process of measuring the volume is also the process of communicating with the designer on the spot. Although it does not take too much time, the seemingly simple and mechanical work affects and determines the next stage of each decoration.

The design is not a simple mechanical repetition. Each owner's internal and external environment is different. Different geographical environments and spatial conditions determine different designs. Designers must observe the location and orientation of the house, and the surrounding environmental conditions, such as whether the noise is too large, the air quality, and whether the lighting is good. Because these conditions directly affect the design of the later period, if the house is near the street, too noisy, the designer can suggest the owner to install insulating glass, so that the sound insulation effect is better; if the original lighting of the house is not good, you need to make up for the design.

Special attention to the room

Understand how many amperes of the total ammeter is. Calculate whether or not your own approximate usage is enough. If you need high power, you need to apply to the power supply bureau in advance.

Understand how many cubic meters of gas and natural gas are. Similarly, if there is any change, we must apply to the gas company in advance.

According to the floor plan (note that it is not the floor plan that was taken when you bought the house, but the exact building plan provided by the property), find out which wall is the load-bearing wall.

Learn about the location of the inlet pipe and the water pipe after entering the house.

Understand the location of the water and the pit of the toilet.

The standard room of step by step secret

Do not think that the amount of room is the designer to take the ruler to measure the length, breadth and height of the house. The standard house of Kuodao contains a detailed survey of the size of the house structure, structural equipment, and so on. This not only embodies a kind of professional attitude in the decoration design, but also expresses a kind of subtle care in the service. Only by making a detailed understanding of the dimensions, equipment, and conditions of the house can the designer judge the advantages and disadvantages of the house more objectively, and try to avoid deviations and repentances in design and construction in the future. In simple terms, a room is basically divided into the following steps:

Step 1 Preparation Tool Renovation

Infrared measuring instrument, tape measure, ruler, standard room manual, camera, electric pen.

Step 2 Drawing

Draw a rough plan of the plane structure on the paper. You don't need to worry too much about the dimensions, as long as you can mark the data.

Step 3 Implementing Measurements Joy Home

A. The original structure of the house: The length and width of the walls in each room, the thickness of the walls and beams, the height of doors and windows, and the height of the walls were measured with a ruler and an infrared measuring instrument.

Concerns: To determine whether the condition of the wall is a cement wall, whether the putty is waterproof, whether the kitchen wall is pulled, if the wall is vertical, and whether the wall is cracked. Pay attention to whether the height of the ground and the door will affect the floor heating. Pay attention to the height of the window and the upper beam, whether it affects the ceiling or the curtain box.

B. Original structure equipment of the house: Measure the dimensions of various pipes, heating, gas, floor drain, and power box, and mark the specific location.

Concerns: Check whether there are any problems with the upper and lower water pipes, whether they can move or add floor drains. Determine if the circuit is in place and there is no threading. Observe whether the air conditioning hole is reserved.

Step 4 Fill in the record

A. Fill out the actual conditions and concerns learned in the measurement process on the standard measurement record sheet, and record the additional conditions after communicating with the customer.

B. The customer fills out a satisfaction survey form to judge the designer's measurement process and supervise the designer's service quality.

Designer reminds:

1. The homeowner should be able to measure the room together with the designer when measuring the amount of room, which can help the designer to understand the state of the house more completely and accurately. If it is impossible to jointly conduct quantitative measures, it is also necessary to jointly conduct a visual inspection and communication, indicating the initial design intent when introducing the housing situation to the designer.

2. Remember to carry the building's water and electricity plans as well as the building's structural drawings before making the measurements. Because many heating pipes and waterway facilities are hidden in the ground, designers cannot measure from the surface; wall structures such as load-bearing walls or soft walls are also difficult to distinguish from the surface, so these two drawings are the most It can be offered to designers.

3. Be sure to understand the residential property where the house is located, the specific provisions for house decoration, such as specific requirements for hydropower and heating renovation, whether the house facade can be demolished, whether the balcony windows can be closed, etc., to avoid unnecessary trouble.

House Window Heating Room New House Kitchen Ceiling Glass Door Kitchen Glass Sliding Door Bathroom Door Bathroom Door Size Bathroom Size Bathroom Ceiling Bathroom Design Toilet Waterproof Decoration Home

Non Slip Mats

Welcome to visit us, we are the factory of Non Slip Floor Mats producer from China, this series made of pvc and widely used for the runners of wet area, like swim pools and vegetable supermarket, also contain chemcial lab or workshop. General of four size mm and Max 8.0mm for customized orders.

Welcome to visit us.

Non Slip Mats,Indoor Floor Mat Non Slip,Non Slip Flooring Mats,Stay Put Non Slip Matting,Anti Slip Bath Mats

Jiangyin Yining E-Commerce Co., Ltd , https://www.jspvcmatyining.com