KCB gear pump internal structure
Reflective Sign,Custom Traffic Warning Sign,Reflective Direction Traffic Signs,Custom Sign Direction Traffic Signs Jiangsu chuanglv Transportation Facilities Co., Ltd , http://www.clsolarlights.com
September 19 12:18:51, 2024
KCB gear pump is to use two gears to interoperate to work, less demanding on the media. General pressure below 6MPa, larger flow. Gear pump in the pump body is equipped with a pair of rotary gear, an active, a passive, relying on the two gear meshing with each other, the entire pump cavity divided into two independent parts. A for the inhalation chamber, B for the discharge chamber. When the gear oil pump is in operation, the driving gear drives the driven gear to rotate. When the gear meshes and disengages, a partial vacuum is formed on the suction side (A) and the liquid is sucked in. The sucked fluid fills each tooth valley of the gear to the discharge side (B), and the liquid is forced out when the gear enters into engagement to form a high-pressure liquid which is discharged outside the pump through the pump discharge port. Gear pump features: 1. Compact, easy to use and maintain. 2. Has a good self-absorption, so every time you open the pump without filling the liquid. 3. Gear pump lubrication is delivered by the liquid automatically reached, so do not have to add daily oil lubrication. Gear pump is widely used in petroleum, chemical, shipbuilding, electric power, grain and oil, food, medical, building materials, metallurgy and national defense research and other industries. Gear pump for conveying solid particles and fibers do not contain, non-corrosive, the temperature is not higher than 150 ℃, the viscosity of 5 ~ 1500cst of lubricating oil or other properties of similar lubricants liquid. Try all kinds of room temperature freezing and freezing in the outdoor installation and process requirements of insulation occasions.