The following home decoration will explain the relevant acceptance criteria for the mid-term acceptance of decoration construction. The main contents include the following eight aspects:

1, the first mid-term acceptance should pay attention to, water supply, drainage pipe installation project acceptance criteria: pipelines, pipe fittings quality should meet the current standards; valve installation should be upright, the switch should be flexible; by water pressure test, all pipes, valves, joints should be no water seepage , Leakage phenomenon. Drainage should be smooth, no leakage, backflow and water phenomenon, high-grade water parts without clamping marks and rubbing phenomenon.

2. Acceptance standards for electrical engineering construction: The leakage switch is installed correctly and used normally; the installation and fixation of electrical devices and equipment should be firm and smooth; the electrical power-on test, lighting test and lamp control performance are good; the appearance of switches, sockets, terminal boxes, etc. Integrity, insulation device without cracks, installation is solid, flat, installation methods in line with the provisions of the parallel installation of the switch, socket terminal box deviation, concealed switch, socket, terminal box panel, the gap around the box in line with regulations; weak power system function right Complete, meet the requirements of use, the appliance is firmly installed and is flat.

3. Acceptance standards for ceiling construction: The types, specifications, colors, basic structure, and fixing methods of the materials used in the ceiling project shall comply with the requirements of the design specifications; the cover panel and the keel shall be closely connected, the surface shall be smooth, and shall not be contaminated or fractured. Lack of edge defects, hammers and other defects, joints should be uniform, paste the cover panel must not be delaminated, plywood shall not be through the place; Shelving cover panel shall not have leakage, penetration, Qiaojiao phenomenon.

4, paste construction acceptance criteria: After the paper paste is completed and dry, before acceptance; acceptance, should check the material varieties, colors, patterns meet the design requirements; wallpaper, wall cloth must be firmly bonded, the surface color is the same, there must be no bubbles , hollowing, cracks, creases and stains, no stigma when strabismus; surface smooth, no corrugations, wallpaper, wall coverings and hanging mirror line, top corner line, affixed face plate, skirting board, lining board layering, curtains Immediately after the hanging box, at a distance of 1.5 meters, there must be no visible gap in the visual inspection; each piece of stitching is horizontal and vertical, the patterns and patterns of the stitching are consistent, and the stitches are not separated from each other; the yin and yang corners are vertical, the edges and corners are clear, and the y There is no seam at the corners of the light and the sun; wallpapers and wall coverings are straight and tidy, with no paper hair or burrs; there must be no leakage, subsidies, and delamination.

5. Acceptance standards for the construction of floral ornaments: After the completion and drying of the floral ornaments, they can be checked; if the floral ornaments are accepted, the varieties, specifications and patterns of the floral ornaments should be checked to meet the design requirements; the floral ornaments should be firmly installed, and their quality requirements and allowable deviations should be In line with: horizontal and vertical allowable deviation of strip floral decoration, the total length shall not be greater than 3 mm; the allowable deviation of the position of the individual floral ornaments shall not be greater than 10 mm; the surface of the floral decoration shall be smooth, with clear patterns, tight joints, and no cracks or warpages. Missing corners and other defects; 裱 flower surface should be smooth, clear patterns, no cracks.

6. Acceptance standards for construction quality of plate surface quality: Materials and patterns meet the requirements of households, product quality conforms to national standards and technical regulations; paving should be firm, not loose, the ground level elevation is not greater than 0.5 mm; paving pattern is clear, no pollution , Slurry marks; straight seams, pull seam inspection, deviation is not greater than 2 mm; seam width is not greater than 1.0 mm; seam height difference between the block and block is not greater than 0.5 mm.

7. Acceptance standards for the installation and construction of wooden floors: The materials should meet the requirements of households and the current product standards; the floor installation (bonding) should be solid, no noise, and no loosening; the wooden floor surface should be polished, no planing, shavings And burr and other phenomena, varnish the floor of the pattern (grain) should be clear; parquet floor seams should be aligned, the same gap width, the surface is clean, no plastic spill phenomenon; skirting board and the floor is closely connected; skirting board along the straight, full The height difference should be no more than ±3 mm and close to the wall, seamless.

8. Acceptance standards for construction quality of plastic board surface: The material, color, and paving should meet the requirements of the households; the surface should be smooth, smooth, wrinkle-free, and must not be curled or bubbling; the color should be the same, the joints should be tight, the four sides should be straight, and the glue should be unglued. The distance shall not be greater than 20 mm, and the interval between them shall not be less than 500 mm; the joint with the pipeline shall be tight, firm and flat; the skirting board shall be closely connected with the plastic board; the skirting board shall be straight, and the full-length height difference shall not be greater than ±3 mm. Face close, seamless.

Acceptance requires the participation of the owners, designers, project supervisors, and the person in charge of construction. After the acceptance, the company will sign and confirm the quality report. Since the construction quality is related to the quality of the construction team; it is also related to the unit price of the construction project, so the best way for the owner to protect the quality of the decoration is to sign the contract before the start of the construction and clarify the decoration requirements and acceptance criteria.

Woodwork Acceptance Nature Floor Switch Decoration Design Socket Wallpaper Home Decoration High-end Curtains

Long Working Distance Microscope

Long Working Distance Microscope,Binocular Dental Microscope,Dental Video Microscope,Digital Microscope Ophthalmic

Ningbo Huaguang Precision Instrument Co., Ltd. , https://www.hgopt.com