Many homeowners choose the floor when decorating the home. The solid wood floor decoration is very common in the home decoration. But how about the solid wood floor installation method? Let’s take a look at it with Xiaobian. Solid wood floor installation method.

First, the installation of solid wood floor installation

Moisture-proof cloth + floor

More suitable ground: ground with a height difference of plus or minus 2 mm

Suitable for: geothermal and non-geothermal

Installation steps for solid wood flooring:

1. Renovate the ground first, then lay a moisture-proof cloth on the ground to cover the entire ground, in order to achieve moisture-proof and sound-proof balance production. The cushion material used for geothermal heat is preferably not too thick and can utilize heat conduction.

2. Lay multiple layers of solid wood flooring on a moisture-proof cloth.

Second, the installation of solid wood floor installation

Special keel + thick splint + moisture-proof cloth + floor

Suitable ground: Suitable for the ground level of not more than 5 mm and the floor above the second floor is suitable for: non-geothermal solid wood floor installation steps:

1. Prepare a special wooden keel. The spacing between the wooden keels should be less than or equal to 350 mm. The keel's frame must be flat.

2. Apply a water-resistant adhesive to the wooden keel, then lay the splint with a thickness of about 12 mm on the skeleton. The splint is best cut to a size of no more than 600 × 600 mm. The spacing between the splint and the splint is 5-10. Mm, then nail the headless nail into the splint and the skeleton.

3. Place a damp-proof cloth over the splint, then lay the floor over the damp-proof cloth and nail the fixed floor at a 45-degree angle on the male peg.

Third, the installation of solid wood floor installation

Thick splint + moisture-proof cloth + floor

Suitable ground: Suitable for ground leveling not exceeding 5 mm and above the second floor. Suitable for: non-geothermal installation steps:

1. Clean the floor, cut the plywood into a size of no more than 600 × 600mm, and leave a gap of 5 to 10 mm between the splint and the splint.

2. Lay moisture-proof or flame-retardant foam on the plywood. The moisture-proof cloth on the wall should be 8 to 10 mm more than the ground. There is no need to paste between the splint and the moisture-proof cloth.

Spread the moisture-proof cloth on the splint, do not paste between the floor and the moisture-proof cloth, and nail the fixed floor on the male plaque with a headless nail at a 45-degree angle.

Book Shelf

Book Shelf,Leaning Bookshelf,Industrial Bookshelf,Mini Bookshelf

Ningbo Oulin Import&Export Co.,Ltd. , https://www.oulinfurniture.com