3G/4G/5g WLAN Base Station Poe Power Supply Solution up to 90W Poe Injector (PSE106G)

June 02 14:09:06, 2024

Model NO.: PSE106G
HS Code: 85176219
Model NO.: PSE106G
HS Code: 85176219
Product Feature
 1. Single-port Midspan  
PSE106GR-OT Power over Ethernet (PoE) single- port Midspan offers a cost effective, fully IEEE 802.3af/802.3at compliant solution for outdoor installations, guaranteeing 36 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal. It allows wireless LAN access points, security network cameras and other IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered.
2. Provide Power with AT detection chip
PSE106GR-OT with AT chip will detect if the PD support IEEE802.3af/at standard. If yes,then output +55VDC;or stop work to protect the PD from destroy.
3.Wide Temperature
The PT-PSE106GR-OT work well during the complex environment within temperature -40ºC-65ºC.
4.Lightning Surge Protection
Provide 8 lines power& signal 6KV(10/700us) lightning-protection for PD escape from lightning strikes. Shell casing, IP66 Waterproof jacket protection on the connector.
5.Waterproof& Easy install
PSE106GR-OT with shell casing IP66 can installed outdoor for using.Tthere are four mounting holes to fixed to the wall by self-tapping screw or tied to shelf.

Introduction:
Spec.
1. Input voltage: 100VAC~240VAC,50Hz~60Hz
2. Output max power: 36W
3. Output Current: 650mA
4. Output voltage regulation precision: 55VDC±5%
5. Loading: 55VDC±1%
6.Working temperature range: -40ºC~+65ºC 
7. CE&RE:
    FCC Part 15, Class B
    EN 55022 Class B
    EN 55024, EN61000-4-5 Class 5 (6KV CM)

3G/4G/5g WLAN Base Station Poe Power Supply Solution up to 90W Poe Injector (PSE106G)
Specification

Standard
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
-Support for IEEE802.3af/at PD
- RoHS Compliant
- WEEE Compliant, CE/FCC
- FCC Part 15,Class B
- EN 55022 Class B
- MTBF:100,000 h.@25ºC  
  PoE Power output
- Ethernet Pin: 4/5(+), 7/8(-) or 3/6(+),1/2(-)
- Data Speed: 10/100/1000Mbps  
-Output Voltage: 55V
-Output Current: 650mA
- Input AC Voltage: 100-240VAC
- Input AC Current: 1.5A@100-240VAC
- AC Hz: 50-60Hz
  Size& Weight 
- Size: 176mm *269mm * 65mm
- Weight: 1.8kg
  physical interface  
- LAN: RJ45
- POE: RJ45
- AC port: three-pin AC power
  LED instructions
- AC power LED: GREEN
- ACTIVE Load LED: GREEN
  Environment
- Temperature: -40ºC to 65ºC
- Height: -304.8 meter to 3048 meters
- Humidity: Max to 90%, without Coagulation
 Network Surge Protection
-Protection line: 1, 2,3,4,5,6,7,8
-Common mode surge voltage (10/700us):6KV
-Clamp Voltage (1,2;3,6;4,5;7,8):7.5Vdc
 Power Output Surge Protection
-Differential mode surge voltage (10/700us):6KV 
-Power clamping voltage (4,5-7,8):60VDC
3G/4G/5g WLAN Base Station Poe Power Supply Solution up to 90W Poe Injector (PSE106G) Product Feature
 1. Single-port Midspan  
PSE106GR-OT Power over Ethernet (PoE) single- port Midspan offers a cost effective, fully IEEE 802.3af/802.3at compliant solution for outdoor installations, guaranteeing 36 Watts of power and ensuring safe and reliable operation in outdoor environment of any standard PoE data terminal. It allows wireless LAN access points, security network cameras and other IP terminals to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered.
2. Provide Power with AT detection chip
PSE106GR-OT with AT chip will detect if the PD support IEEE802.3af/at standard. If yes,then output +55VDC;or stop work to protect the PD from destroy.
3.Wide Temperature
The PT-PSE106GR-OT work well during the complex environment within temperature -40ºC-65ºC.
4.Lightning Surge Protection
Provide 8 lines power& signal 6KV(10/700us) lightning-protection for PD escape from lightning strikes. Shell casing, IP66 Waterproof jacket protection on the connector.
5.Waterproof& Easy install
PSE106GR-OT with shell casing IP66 can installed outdoor for using.Tthere are four mounting holes to fixed to the wall by self-tapping screw or tied to shelf.

Introduction:
Spec.
1. Input voltage: 100VAC~240VAC,50Hz~60Hz
2. Output max power: 36W
3. Output Current: 650mA
4. Output voltage regulation precision: 55VDC±5%
5. Loading: 55VDC±1%
6.Working temperature range: -40ºC~+65ºC 
7. CE&RE:
    FCC Part 15, Class B
    EN 55022 Class B
    EN 55024, EN61000-4-5 Class 5 (6KV CM)

3G/4G/5g WLAN Base Station Poe Power Supply Solution up to 90W Poe Injector (PSE106G)
Specification

Standard
- IEEE802.3 10Base-T Ethernet
- IEEE802.3u 100Base-Tx Fast Ethernet
- IEEE802.3ab 1000Base-T Gigabit Ethernet
-Support for IEEE802.3af/at PD
- RoHS Compliant
- WEEE Compliant, CE/FCC
- FCC Part 15,Class B
- EN 55022 Class B
- MTBF:100,000 h.@25ºC  
  PoE Power output
- Ethernet Pin: 4/5(+), 7/8(-) or 3/6(+),1/2(-)
- Data Speed: 10/100/1000Mbps  
-Output Voltage: 55V
-Output Current: 650mA
- Input AC Voltage: 100-240VAC
- Input AC Current: 1.5A@100-240VAC
- AC Hz: 50-60Hz
  Size& Weight 
- Size: 176mm *269mm * 65mm
- Weight: 1.8kg
  physical interface  
- LAN: RJ45
- POE: RJ45
- AC port: three-pin AC power
  LED instructions
- AC power LED: GREEN
- ACTIVE Load LED: GREEN
  Environment
- Temperature: -40ºC to 65ºC
- Height: -304.8 meter to 3048 meters
- Humidity: Max to 90%, without Coagulation
 Network Surge Protection
-Protection line: 1, 2,3,4,5,6,7,8
-Common mode surge voltage (10/700us):6KV
-Clamp Voltage (1,2;3,6;4,5;7,8):7.5Vdc
 Power Output Surge Protection
-Differential mode surge voltage (10/700us):6KV 
-Power clamping voltage (4,5-7,8):60VDC
3G/4G/5g WLAN Base Station Poe Power Supply Solution up to 90W Poe Injector (PSE106G)

Outdoor Wall Lamp

Outdoor Wall Lamp,Outdoor Wall Lights,Architecture Luminaires,Outdoor Luminaires

Ningbo Royalux Lighting Co., Ltd. , https://www.royaluxled.com