1)Our blades are made of imported special bandsaw materials for the tooth and back, and the tooth-shape design of positive rake angle has been optimized and upgraded, which increases the strength and wear-resistance of tooth, prolongs the blade life and extends the cutting area, making our blade is more suitable for cutting general, intractable, and wear-resistant materials with high efficiency.Â
2) It is the new cutting material generation with advanced tooth geometry. Extreme resistance to heat and wear.
Greatly strengthen the advantages of teeth hardness, red hardness, toughness and wear resistance. It was specially created for work pieces which are difficult to cut.
It is suitable for efficient cutting on stainless steel, mold steel, cast iron, bearing steel, titanium alloy, forged steel, hardened and tempered steel, high temperature alloy, etc.
The teeth hardness is about 69HRC (1000HV).Â
Â
mm
Inch
0.75/1.25
1.0/1.5
1.4/2.0
2/3
3/4
4/6
27x0.9
1 x 0.035
Â
Â
Â
√
√
√
34x1.1
1 1/4 x 0.042
Â
Â
Â
√
√
√
41x1.3
1 1/2 x 0.050
Â
Â
√
√
√
√
54x1.6
2 x 0.063
√
√
√
√
√
Â
67x1.6
2 5/8x0.063
√
√
√
√
√
Â
FAQ:
1) Q: Can  i have your quotation?
A: First, please offer us the information of your cutting material, size, etc
without these parameter, we are not able to recommend you the suitable saw blade.
2)Â Q: Do you have overseas service?
 A: No,but we normally help our customers to solve the problems through phone,Email, skype, internet video. high efficiency. We offer one year guaranteen, within one year, if component of the  machine broken, we freely offer the component, but the delivery fee should be paide by client
 3)Q: What is the voltage and Hertz in your country?
A: In China,the Voltage is 380V(3 Phase), the Hertz is 50HZ, we can change the voltage and Hertz according to your requirment.
4) Q: How about the payment term
A:Â Â T/T 30% deposit, 70% of balance paid at the sight of bl copy send by email. B. By 100% irrevocable LC at sight.
Â
Product Description
1)Our blades are made of imported special bandsaw materials for the tooth and back, and the tooth-shape design of positive rake angle has been optimized and upgraded, which increases the strength and wear-resistance of tooth, prolongs the blade life and extends the cutting area, making our blade is more suitable for cutting general, intractable, and wear-resistant materials with high efficiency.Â
2) It is the new cutting material generation with advanced tooth geometry. Extreme resistance to heat and wear.
Greatly strengthen the advantages of teeth hardness, red hardness, toughness and wear resistance. It was specially created for work pieces which are difficult to cut.
It is suitable for efficient cutting on stainless steel, mold steel, cast iron, bearing steel, titanium alloy, forged steel, hardened and tempered steel, high temperature alloy, etc.
The teeth hardness is about 69HRC (1000HV).Â
Â
mm
Inch
0.75/1.25
1.0/1.5
1.4/2.0
2/3
3/4
4/6
27x0.9
1 x 0.035
Â
Â
Â
√
√
√
34x1.1
1 1/4 x 0.042
Â
Â
Â
√
√
√
41x1.3
1 1/2 x 0.050
Â
Â
√
√
√
√
54x1.6
2 x 0.063
√
√
√
√
√
Â
67x1.6
2 5/8x0.063
√
√
√
√
√
Â
FAQ:
1) Q: Can  i have your quotation?
A: First, please offer us the information of your cutting material, size, etc
without these parameter, we are not able to recommend you the suitable saw blade.
2)Â Q: Do you have overseas service?
 A: No,but we normally help our customers to solve the problems through phone,Email, skype, internet video. high efficiency. We offer one year guaranteen, within one year, if component of the  machine broken, we freely offer the component, but the delivery fee should be paide by client
 3)Q: What is the voltage and Hertz in your country?
A: In China,the Voltage is 380V(3 Phase), the Hertz is 50HZ, we can change the voltage and Hertz according to your requirment.
4) Q: How about the payment term
A:Â Â T/T 30% deposit, 70% of balance paid at the sight of bl copy send by email. B. By 100% irrevocable LC at sight.
Steel bends and steel elbows are both very common pipe fittings which are used to change the flowing direction in a piping systems. In addition to pipe fittings for connecting , elbow pipe also refers to a processing method. It is to Bend the straight pipe through the processing method to achieve the purpose of changing the circulation direction of the pipeline. The manufacturing process and the finished product are called pipe bend.
In order to ensure that the wall thickness of the bending part is no less than that of the straight pipe part, the minimum radius of the pipe bending should be 3D( the D means nominal diameter of this bend).The specific size depends on the operating conditions. That is to say, radius is not restricted as long as it exceeds 3D, which can be 3D or 3.2D, even 4D, 5D, 6D and 8D are also acceptable.In addition, the angle of the bend can be in any degree, some times there are also custom-designed bends which are 22.5 °, 45 °, 90 °, 135 °, 180 °, 270 ° and so on.
