3003 aluminum treadplate has an obvious characteristic: Anti-rust. It is belong to Anti skid aluminum sheet. It is mainly used in the floor of trucks, public buses, railways...etc, so it has another name which is called aluminum floor sheet.
1 Anti skid aluminum sheet 2 Alloy: 3003 3 Temper: H14, H16, H18, H22, H24, O 4 Patterns: Big 5 bar, small 5 bar, diamond 5 Thickness range; 1.0mm-12.0mm 6 Width range: 800mm-1500mm 7 Length range: 1000mm-6000mm 8 Payment incoterms: FOB, CFR, CIF 9 Min order quantity: 1 metric ton for each size 10 Delivery lead time: 15-20 days 11 Packing: Wooden pallet, wooden box, veneer pallet, veneer box 12 Certificate: ISO9001 13 Country of origin; China 14 H. S. Code: 7606125900 15 Third party inspection: Acceptable 16 Chemical composition: Silicon 0.60 Iron 0.70 Copper 0.05-0.20 Manganese 1.0-1.5 Magnesium None Titanium None Zinc 0.10 max Remainder Each 0.05 max Other 0.15 max Aluminum: Balance
Specification
Name: 3000 series Aluminum Chequered Plate
Alloy: 3003Â etc.
Temper: O, H12, H22, H32, H14, H24, H26, H18 etc.
Thickness: 1.5-12mm
Width: Up to 1500mm
Length: Up to 6000mm
Type: big five bars, small five bars, diamond
Feature
Machinability: It is readily machined and is considered as having good machinability for the aluminum alloys,.
Forming: It is readily formed by either conventional cold working or hot working.
Welding: It is readily accomplished by means of conventional welding methods.
Heat Treatment: It is a non-heat treatable alloy.
Forging: It may be hot forged in the range of 950 F to 500 F.
Hot Working: The hot working range (as for forging) is 950 F to 500 F. In that range the alloy is easily hot worked.
Cold Working: It is readily cold worked by all conventional methods.
Annealing: Annealing, during or following cold working, is done at 775 F, allowing adequate time for thorough heating, followed by air cooling.
Hardening: Hardens as a result of cold working only.
Application
Chemical equipment, ductwork, and in general sheet metal work, cooking utensils, pressure vessels, builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchangers, drawn and spun parts, and storage tanks etc.
Alloy
Chemical Component %≤
Si
Fe
Cu
Mn
Mg
Cr
Ni
Zn
Ti
others
Al
single
total
3003
0.6
0.7
0.05-0.20
1.0-1.5
\
\
\
0.1
\
0.05
0.15
remainder
Contact
Ms. Cherry Xia
Â
Tel: 0086-0535-6879033
3003 aluminum treadplate has an obvious characteristic: Anti-rust. It is belong to Anti skid aluminum sheet. It is mainly used in the floor of trucks, public buses, railways...etc, so it has another name which is called aluminum floor sheet.
1 Anti skid aluminum sheet 2 Alloy: 3003 3 Temper: H14, H16, H18, H22, H24, O 4 Patterns: Big 5 bar, small 5 bar, diamond 5 Thickness range; 1.0mm-12.0mm 6 Width range: 800mm-1500mm 7 Length range: 1000mm-6000mm 8 Payment incoterms: FOB, CFR, CIF 9 Min order quantity: 1 metric ton for each size 10 Delivery lead time: 15-20 days 11 Packing: Wooden pallet, wooden box, veneer pallet, veneer box 12 Certificate: ISO9001 13 Country of origin; China 14 H. S. Code: 7606125900 15 Third party inspection: Acceptable 16 Chemical composition: Silicon 0.60 Iron 0.70 Copper 0.05-0.20 Manganese 1.0-1.5 Magnesium None Titanium None Zinc 0.10 max Remainder Each 0.05 max Other 0.15 max Aluminum: Balance
Specification
Name: 3000 series Aluminum Chequered Plate
Alloy: 3003Â etc.
Temper: O, H12, H22, H32, H14, H24, H26, H18 etc.
Thickness: 1.5-12mm
Width: Up to 1500mm
Length: Up to 6000mm
Type: big five bars, small five bars, diamond
Feature
Machinability: It is readily machined and is considered as having good machinability for the aluminum alloys,.
Forming: It is readily formed by either conventional cold working or hot working.
Welding: It is readily accomplished by means of conventional welding methods.
Heat Treatment: It is a non-heat treatable alloy.
Forging: It may be hot forged in the range of 950 F to 500 F.
Hot Working: The hot working range (as for forging) is 950 F to 500 F. In that range the alloy is easily hot worked.
Cold Working: It is readily cold worked by all conventional methods.
Annealing: Annealing, during or following cold working, is done at 775 F, allowing adequate time for thorough heating, followed by air cooling.
Hardening: Hardens as a result of cold working only.
Application
Chemical equipment, ductwork, and in general sheet metal work, cooking utensils, pressure vessels, builder's hardware, eyelet stock, ice cube trays, garage doors, awning slats, refrigerator panels, gas lines, gasoline tanks, heat exchangers, drawn and spun parts, and storage tanks etc.
